FAG B7008-C-T-P4S Bearing

FAG B7008-C-T-P4S spindle bearings | 40x68x15mm

Also known as : B7008-C-T-P4S

• Inside Diameter: 40 mm
• Outside Diameter: 68 mm
• Width: 15 mm
• Basic dynamic load rating: 20.9 kN
• Basic static load rating: 11.2 kN

Inquire Now

FAG B7008-C-T-P4S Bearing

Number	B7008-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	40 mm
D	68 mm
B	15 mm
a	14,7 mm
Da	62 mm	Tolerance: H12
da	46 mm	Tolerance: h12
Etk max	51,8 mm
Etk min	49,3 mm
Etk1 max	51,8 mm
Etk1 min	49,3 mm
r1 min	1 mm
ra max	1 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,189 kg	≈ Mass
Cr	20900 N	Basic dynamic load rating, radial
C0r	11200 N	Basic static load rating, radial
Cur	1150 N	Fatigue limit load, radial
nG Fett	22000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	34000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	101 N	Preload force
FV M	344 N	Preload force
FV H	698 N	Preload force
KaE L	312 N	Lift-off force
KaE M	1157 N	Lift-off force
KaE H	2515 N	Lift-off force
ca L	43,2 N/µm	Axial rigidity
ca M	75,6 N/µm	Axial rigidity
ca H	109 N/µm	Axial rigidity

Nodes bearings have FAG B7008-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.