FAG HSS71913-C-T-P4S Bearing

FAG HSS71913-C-T-P4S spindle bearings | 65x90x13mm

Also known as : HSS71913-C-T-P4S

  • Inside Diameter: 65 mm
  • Outside Diameter: 90 mm
  • Width: 13 mm
  • Basic dynamic load rating: 13.8 kN
  • Basic static load rating: 9.9 kN

Inquire Now


FAG HSS71913-C-T-P4S Bearing

FAG HSS71913-C-T-P4S Bearing details

Number HSS71913-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
 
d 65 mm   
D 90 mm   
B 13 mm   
a 16,9 mm   
Da 85,5 mm  Tolerance: H12
da 70 mm  Tolerance: h12
r1 min 1 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 1 mm   
α 15 °  Contact angle
m 0,251 kg  ≈ Mass
Cr 13800 N  Basic dynamic load rating, radial
C0r 9900 N  Basic static load rating, radial
Cur 1010 N  Fatigue limit load, radial
nG Fett 20000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 48 N  Preload force
FV M 144 N  Preload force
FV H 287 N  Preload force
KaE L 143 N  Lift-off force
KaE M 450 N  Lift-off force
KaE H 937 N  Lift-off force
ca L 41,5 N/µm  Axial rigidity
ca M 65 N/µm  Axial rigidity
ca H 88,8 N/µm  Axial rigidity

Nodes bearings have FAG HSS71913-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71913-C-T-P4S bearing cross reference

NSK 7913C bearing
65mm x 90mm x 13mm
NSK 7913CDB bearing
65mm x 90mm x 13mm
NSK 7913CDF bearing
65mm x 90mm x 13mm
NSK 7913A5DT bearing
65mm x 90mm x 13mm
NSK 7913CDT bearing
65mm x 90mm x 13mm
FAG B7013-C-T-P4S bearing
65mm x 100mm x 18mm
FAG B71913-C-T-P4S bearing
65mm x 90mm x 13mm
FAG B7213-C-T-P4S bearing
65mm x 120mm x 23mm
FAG B7013-E-T-P4S bearing
65mm x 100mm x 18mm
FAG B71913-E-T-P4S bearing
65mm x 90mm x 13mm
FAG B7213-E-T-P4S bearing
65mm x 120mm x 23mm

FAG spindle bearings

Related Information

Product search