TIMKEN 43096-43300 Bearing

TIMKEN 43096-43300 tapered roller bearings

Also known as : 43096-43300

  • Inside Diameter: 24.384 mm
  • Outside Diameter: 76.2 mm
  • Width: 24.608 mm
  • Basic dynamic load rating: 92 kN
  • Basic static load rating: 76.2 kN

Inquire Now


TIMKEN 43096-43300 Bearing

TIMKEN 43096-43300 Bearing details

Series 43000
model 43096-43300
Cone Part Number 43096
Cup Part Number 43300
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.600 Kg
1.30 lb
Dimensions
d - Bore 24.384 mm
0.9600 in
D - Cup Outer Diameter 76.2 mm
3 in
B - Cone Width 24.074 mm
0.9478 in
C - Cup Width 16.670 mm
0.6563 in
T - Bearing Width 24.608 mm
0.9688 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 0.760 mm
0.03 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 39.62 mm
1.56 in
db - Cone Backface Backing Diameter 40.39 mm
1.59 in
Da - Cup Frontface Backing Diameter 73.90 mm
2.91 in
Db - Cup Backface Backing Diameter 64.01 mm
2.52 in
Ab - Cage-Cone Frontface Clearance 3.3 mm
0.13 in
Aa - Cage-Cone Backface Clearance 2.5 mm
0.1 in
a - Effective Center Location -2.00 mm
-0.08 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 23900 N
5360 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 92000 N
20700 lbf
C0 - Static Radial Rating 76200 N
17100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 27300 N
6130 lbf
Factors
K - Factor 0.87
e - ISO Factor 0.67
Y - ISO Factor 0.9
G1 - Heat Generation Factor (Roller-Raceway) 16.8
G2 - Heat Generation Factor (Rib-Roller End) 7.6
Cg - Geometry Factor 0.0774

TIMKEN 43096-43300 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

TIMKEN bearing cross reference

TIMKEN 43096-43312 bearing
24.384mm x 79.375mm x 25.400mm
TIMKEN 43096-43326 bearing
24.384mm x 82.550mm x 25.400mm
TIMKEN 43096-43319D bearing
24.384mm x 80.963mm x 55.563mm