TIMKEN 07098-07204-B Bearing

TIMKEN 07098-07204-B tapered bearings with Flange

Also known as : 07098-07204-B

  • Inside Diameter: 24.981 mm
  • Outside Diameter: 51.994 mm
  • Width: 5.08 mm
  • Basic dynamic load rating: 29.1 kN
  • Basic static load rating: 29.6 kN

Inquire Now

TIMKEN 07098-07204-B Bearing

TIMKEN 07098-07204-B Bearing details

Series 07000
model 07098-07204-B
Cone Part Number 07098
Cup Part Number 07204-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.100 Kg
0.30 lb
Dimensions
d - Bore 24.981 mm
0.9835 in
D - Cup Outer Diameter 51.994 mm
2.0470 in
D1 - Flange Outer Diameter 55.855 mm
2.1990 in
B - Cone Width 14.260 mm
0.5614 in
C - Cup Width 12.700 mm
0.5000 in
C1 - Cup Flange Width 2.769 mm
0.1090 in
T - Bearing Width to Flange 5.080 mm
0.2000 in
T1 - Bearing Width 15.011 mm
0.5910 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.5 mm
0.06 in
da - Cone Frontface Backing Diameter 29 mm
1.14 in
db - Cone Backface Backing Diameter 31 mm
1.22 in
Da - Cup Frontface Backing Diameter 50.04 mm
2.01 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location -2.8 mm
-0.11 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 7550 N
1700 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 29100 N
6540 lbf
C0 - Static Radial Rating 29600 N
6650 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 5190 N
1170 lbf
Factors
K - Factor 1.45
e - ISO Factor 0.40
Y - ISO Factor 1.49
G1 - Heat Generation Factor (Roller-Raceway) 7.6
G2 - Heat Generation Factor (Rib-Roller End) 7.07
Cg - Geometry Factor 0.0509

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 07098-07204-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products