TIMKEN 16150-16284-B Bearing

TIMKEN 16150-16284-B tapered bearings with Flange

Also known as : 16150-16284-B

  • Inside Diameter: 38.1 mm
  • Outside Diameter: 72.238 mm
  • Width: 8.733 mm
  • Basic dynamic load rating: 56.6 kN
  • Basic static load rating: 65.8 kN

Inquire Now

TIMKEN 16150-16284-B Bearing

TIMKEN 16150-16284-B Bearing details

Series 16000
model 16150-16284-B
Cone Part Number 16150
Cup Part Number 16284-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.600 Kg
1.20 lb
Dimensions
d - Bore 38.1 mm
1.5 in
D - Cup Outer Diameter 72.238 mm
2.8440 in
D1 - Flange Outer Diameter 76.098 mm
2.9960 in
B - Cone Width 20.638 mm
0.8125 in
C - Cup Width 15.875 mm
0.6250 in
C1 - Cup Flange Width 3.970 mm
0.1563 in
T - Bearing Width to Flange 8.733 mm
0.3438 in
T1 - Bearing Width 20.638 mm
0.8125 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 0.80 mm
0.030 in
da - Cone Frontface Backing Diameter 42.90 mm
1.69 in
db - Cone Backface Backing Diameter 49.5 mm
1.95 in
Da - Cup Frontface Backing Diameter 69.60 mm
2.74 in
Ab - Cage-Cone Frontface Clearance 1.8 mm
0.07 in
Aa - Cage-Cone Backface Clearance 0.5 mm
0.02 in
a - Effective Center Location -4.1 mm
-0.16 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 14700 N
3300 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 56600 N
12700 lbf
C0 - Static Radial Rating 65800 N
14800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 10100 N
2270 lbf
Factors
K - Factor 1.45
e - ISO Factor 0.40
Y - ISO Factor 1.49
G1 - Heat Generation Factor (Roller-Raceway) 20.3
G2 - Heat Generation Factor (Rib-Roller End) 10.6
Cg - Geometry Factor 0.0707

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 16150-16284-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products