TIMKEN 27684-27620-B Bearing

TIMKEN 27684-27620-B tapered bearings with Flange

Also known as : 27684-27620-B

• Inside Diameter: 76.2 mm
• Outside Diameter: 125.413 mm
• Width: 10.317 mm
• Basic dynamic load rating: 117 kN
• Basic static load rating: 178 kN

Inquire Now

TIMKEN 27684-27620-B Bearing

Series	27600
model	27684-27620-B
Cone Part Number	27684
Cup Part Number	27620-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.900 Kg 2.00 lb
Dimensions
d - Bore	76.2 mm 3 in
D - Cup Outer Diameter	125.413 mm 4.9375 in
D1 - Flange Outer Diameter	130.076 mm 5.1211 in
B - Cone Width	25.400 mm 1.0000 in
C - Cup Width	19.845 mm 0.7813 in
C1 - Cup Flange Width	4.763 mm 0.1875 in
T - Bearing Width to Flange	10.317 mm 0.4062 in
T1 - Bearing Width	25.400 mm 1.0000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.600 mm 0.14 in
r - Cup Backface "To Clear" Radius	1.5 mm 0.06 in
da - Cone Frontface Backing Diameter	84.10 mm 3.31 in
db - Cone Backface Backing Diameter	90.90 mm 3.58 in
Da - Cup Frontface Backing Diameter	122.94 mm 4.87 in
Ab - Cage-Cone Frontface Clearance	2.3 mm 0.09 in
Aa - Cage-Cone Backface Clearance	1.3 mm 0.05 in
a - Effective Center Location	0.5 mm 0.02 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	30400 N 6830 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	117000 N 26300 lbf
C0 - Static Radial Rating	178000 N 39900 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	21600 N 4860 lbf
Factors
K - Factor	1.4
e - ISO Factor	0.42
Y - ISO Factor	1.44
G1 - Heat Generation Factor (Roller-Raceway)	98.2
G2 - Heat Generation Factor (Rib-Roller End)	41.8
Cg - Geometry Factor	0.120

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 27684-27620-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.