TIMKEN 3583-3525-B Bearing

TIMKEN 3583-3525-B tapered bearings with Flange

Also known as : 3583-3525-B

  • Inside Diameter: 38.1 mm
  • Outside Diameter: 87.313 mm
  • Width: 11.113 mm
  • Basic dynamic load rating: 113 kN
  • Basic static load rating: 134 kN

Inquire Now

TIMKEN 3583-3525-B Bearing

TIMKEN 3583-3525-B Bearing details

Series 3500
model 3583-3525-B
Cone Part Number 3583
Cup Part Number 3525-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.400 Kg
3.10 lb
Dimensions
d - Bore 38.1 mm
1.5 in
D - Cup Outer Diameter 87.313 mm
3.4375 in
D1 - Flange Outer Diameter 91.986 mm
3.6215 in
B - Cone Width 30.886 mm
1.2160 in
C - Cup Width 23.813 mm
0.9375 in
C1 - Cup Flange Width 4.750 mm
0.1870 in
T - Bearing Width to Flange 11.113 mm
0.4375 in
T1 - Bearing Width 30.175 mm
1.1880 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 45.5 mm
1.79 in
db - Cone Backface Backing Diameter 52.1 mm
2.05 in
Da - Cup Frontface Backing Diameter 82.04 mm
3.27 in
Ab - Cage-Cone Frontface Clearance 1.3 mm
0.05 in
Aa - Cage-Cone Backface Clearance 1.8 mm
0.07 in
a - Effective Center Location -10.2 mm
-0.4 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 29400 N
6610 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 113000 N
25500 lbf
C0 - Static Radial Rating 134000 N
30100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 15400 N
3460 lbf
Factors
K - Factor 1.91
e - ISO Factor 0.31
Y - ISO Factor 1.96
G1 - Heat Generation Factor (Roller-Raceway) 39.5
G2 - Heat Generation Factor (Rib-Roller End) 10.5
Cg - Geometry Factor 0.0808

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3583-3525-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products