TIMKEN 463-453-B Bearing

TIMKEN 463-453-B tapered bearings with Flange

Also known as : 463-453-B

  • Inside Diameter: 47.625 mm
  • Outside Diameter: 107.95 mm
  • Width: 11.113 mm
  • Basic dynamic load rating: 136 kN
  • Basic static load rating: 166 kN

Inquire Now

TIMKEN 463-453-B Bearing

TIMKEN 463-453-B Bearing details

Series 455
model 463-453-B
Cone Part Number 463
Cup Part Number 453-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.300 Kg
2.90 lb
Dimensions
d - Bore 47.625 mm
1.8750 in
D - Cup Outer Diameter 107.95 mm
4.25 in
D1 - Flange Outer Diameter 113.386 mm
4.4640 in
B - Cone Width 29.317 mm
1.1542 in
C - Cup Width 22.225 mm
0.8750 in
C1 - Cup Flange Width 5.558 mm
0.2188 in
T - Bearing Width to Flange 11.113 mm
0.4375 in
T1 - Bearing Width 27.780 mm
1.0937 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 4.800 mm
0.190 in
r - Cup Backface "To Clear" Radius 0.80 mm
0.030 in
da - Cone Frontface Backing Diameter 55.90 mm
2.2 in
db - Cone Backface Backing Diameter 65 mm
2.56 in
Da - Cup Frontface Backing Diameter 100.58 mm
3.96 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 1.8 mm
0.07 in
a - Effective Center Location -7.1 mm
-0.28 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 35200 N
7900 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 136000 N
30500 lbf
C0 - Static Radial Rating 166000 N
37200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 20200 N
4540 lbf
Factors
K - Factor 1.74
e - ISO Factor 0.34
Y - ISO Factor 1.79
G1 - Heat Generation Factor (Roller-Raceway) 58.6
G2 - Heat Generation Factor (Rib-Roller End) 17.1
Cg - Geometry Factor 0.0946

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 463-453-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related numbers

TIMKEN 369-S-362-B bearing
47.625mm x 90.000mm x 8.887mm
TIMKEN 369A-362-B bearing
47.625mm x 90.000mm x 8.887mm
TIMKEN 3779-3720-B bearing
47.625mm x 93.264mm x 11.113mm
TIMKEN 3778-3720-B bearing
47.625mm x 93.264mm x 11.113mm
TIMKEN HM804846-HM804811-B bearing
47.625mm x 95.250mm x 11.140mm
TIMKEN 467-453-B bearing
47.625mm x 107.95mm x 11.113mm
TIMKEN 463-453XB bearing
47.625mm x 107.95mm x 8.738mm
TIMKEN 467-453XB bearing
47.625mm x 107.95mm x 8.735mm
TIMKEN 59187-59429-B bearing
47.625mm x 108.966mm x 14.288mm
TIMKEN 617-612-B bearing
47.625mm x 120.650mm x 16.574mm

Related products