TIMKEN 598-592-B Bearing

TIMKEN 598-592-B tapered bearings with Flange

Also known as : 598-592-B

  • Inside Diameter: 92.075 mm
  • Outside Diameter: 152.4 mm
  • Width: 15.875 mm
  • Basic dynamic load rating: 216 kN
  • Basic static load rating: 319 kN

Inquire Now

TIMKEN 598-592-B Bearing

TIMKEN 598-592-B Bearing details

Series 595
model 598-592-B
Cone Part Number 598
Cup Part Number 592-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 2.700 Kg
5.900 lb
Dimensions
d - Bore 92.075 mm
3.6250 in
D - Cup Outer Diameter 152.400 mm
6.0000 in
D1 - Flange Outer Diameter 158.648 mm
6.2460 in
B - Cone Width 36.322 mm
1.4300 in
C - Cup Width 30.163 mm
1.1875 in
C1 - Cup Flange Width 6.350 mm
0.2500 in
T - Bearing Width to Flange 15.875 mm
0.6250 in
T1 - Bearing Width 39.688 mm
1.5625 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 101.10 mm
3.98 in
db - Cone Backface Backing Diameter 106.90 mm
4.21 in
Da - Cup Frontface Backing Diameter 144.02 mm
5.71 in
Ab - Cage-Cone Frontface Clearance 2.3 mm
0.09 in
Aa - Cage-Cone Backface Clearance 3.8 mm
0.15 in
a - Effective Center Location -2.5 mm
-0.1 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 56000 N
12600 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 216000 N
48600 lbf
C0 - Static Radial Rating 319000 N
71600 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 42400 N
9530 lbf
Factors
K - Factor 1.32
e - ISO Factor 0.44
Y - ISO Factor 1.36
G1 - Heat Generation Factor (Roller-Raceway) 151
G2 - Heat Generation Factor (Rib-Roller End) 36.8
Cg - Geometry Factor 0.142

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 598-592-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products