TIMKEN 644-632-B tapered bearings with Flange
Also known as : 644-632-B
- Inside Diameter: 71.438 mm
- Outside Diameter: 136.525 mm
- Width: 16.662 mm
- Basic dynamic load rating: 276 kN
- Basic static load rating: 298 kN
![](/img/timken/tsf/ty.jpg)
TIMKEN 644-632-B Bearing
TIMKEN 644-632-B Bearing details
Series | 635 |
---|---|
model | 644-632-B |
Cone Part Number | 644 |
Cup Part Number | 632-B |
Design Units | Imperial |
Cage Type | Stamped Steel |
Bearing Weight |
2.600 Kg 5.80 lb |
Dimensions | |
d - Bore |
71.438 mm 2.8125 in |
D - Cup Outer Diameter |
136.525 mm 5.3750 in |
D1 - Flange Outer Diameter |
143.561 mm 5.6520 in |
B - Cone Width |
41.275 mm 1.6250 in |
C - Cup Width |
31.750 mm 1.2500 in |
C1 - Cup Flange Width |
7.137 mm 0.2810 in |
T - Bearing Width to Flange |
16.662 mm 0.6560 in |
T1 - Bearing Width |
41.278 mm 1.6251 in |
Abutment and Fillet Dimensions | |
R - Cone Backface "To Clear" Radius |
3.600 mm 0.14 in |
r - Cup Backface "To Clear" Radius |
3.30 mm 0.130 in |
da - Cone Frontface Backing Diameter |
81 mm 3.19 in |
db - Cone Backface Backing Diameter |
87.10 mm 3.43 in |
Da - Cup Frontface Backing Diameter |
125.98 mm 4.96 in |
Ab - Cage-Cone Frontface Clearance |
2.5 mm 0.1 in |
Aa - Cage-Cone Backface Clearance |
3.8 mm 0.15 in |
a - Effective Center Location |
-11.2 mm -0.44 in |
Basic Load Ratings | |
C90 - Dynamic Radial Rating (90 million revolutions) |
71600 N 16100 lbf |
C1 - Dynamic Radial Rating (1 million revolutions) |
276000 N 62100 lbf |
C0 - Static Radial Rating |
298000 N 67000 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions) |
44400 N 9980 lbf |
Factors | |
K - Factor | 1.61 |
e - ISO Factor | 0.36 |
Y - ISO Factor | 1.66 |
G1 - Heat Generation Factor (Roller-Raceway) | 106 |
G2 - Heat Generation Factor (Rib-Roller End) | 21 |
Cg - Geometry Factor | 0.0814 |
As TIMKEN bearing distributor, Nodes bearings have TIMKEN 644-632-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.
Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.
![](/img/timken/tsf/drawing-tsf.png)
TIMKEN bearing cross reference
![](/img/timken/tsf/ty.jpg)