TIMKEN 941-932-B Bearing

TIMKEN 941-932-B tapered bearings with Flange

Also known as : 941-932-B

  • Inside Diameter: 101.6 mm
  • Outside Diameter: 212.725 mm
  • Width: 23.813 mm
  • Basic dynamic load rating: 572 kN
  • Basic static load rating: 786 kN

Inquire Now

TIMKEN 941-932-B Bearing

TIMKEN 941-932-B Bearing details

Series 935
model 941-932-B
Cone Part Number 941
Cup Part Number 932-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 11.30 Kg
25.000 lb
Dimensions
d - Bore 101.600 mm
4.0000 in
D - Cup Outer Diameter 212.725 mm
8.3750 in
D1 - Flange Outer Diameter 223.736 mm
8.8085 in
B - Cone Width 66.675 mm
2.6250 in
C - Cup Width 53.975 mm
2.1250 in
C1 - Cup Flange Width 11.113 mm
0.4375 in
T - Bearing Width to Flange 23.813 mm
0.9375 in
T1 - Bearing Width 66.675 mm
2.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 7.100 mm
0.280 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 117.10 mm
4.61 in
db - Cone Backface Backing Diameter 130 mm
5.12 in
Da - Cup Frontface Backing Diameter 199.90 mm
7.87 in
Ab - Cage-Cone Frontface Clearance 2.3 mm
0.09 in
Aa - Cage-Cone Backface Clearance 5.8 mm
0.23 in
a - Effective Center Location -19.8 mm
-0.78 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 148000 N
33300 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 572000 N
129000 lbf
C0 - Static Radial Rating 786000 N
177000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 82700 N
18600 lbf
Factors
K - Factor 1.79
e - ISO Factor 0.33
Y - ISO Factor 1.84
G1 - Heat Generation Factor (Roller-Raceway) 339
G2 - Heat Generation Factor (Rib-Roller End) 39.7
Cg - Geometry Factor 0.115

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 941-932-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products