TIMKEN L624549-L624510-B Bearing

TIMKEN L624549-L624510-B tapered bearings with Flange

Also known as : L624549-L624510-B

  • Inside Diameter: 120.65 mm
  • Outside Diameter: 160.338 mm
  • Width: 8.733 mm
  • Basic dynamic load rating: 97.5 kN
  • Basic static load rating: 206 kN

Inquire Now

TIMKEN L624549-L624510-B Bearing

TIMKEN L624549-L624510-B Bearing details

Series L624500
model L624549-L624510-B
Cone Part Number L624549
Cup Part Number L624510-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.200 Kg
2.60 lb
Dimensions
d - Bore 120.650 mm
4.7500 in
D - Cup Outer Diameter 160.338 mm
6.3125 in
D1 - Flange Outer Diameter 164.203 mm
6.4647 in
B - Cone Width 21.433 mm
0.8438 in
C - Cup Width 16.670 mm
0.6563 in
C1 - Cup Flange Width 3.970 mm
0.1563 in
T - Bearing Width to Flange 8.733 mm
0.3438 in
T1 - Bearing Width 21.433 mm
0.8438 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.5 mm
0.06 in
da - Cone Frontface Backing Diameter 127 mm
5 in
db - Cone Backface Backing Diameter 129 mm
5.08 in
Da - Cup Frontface Backing Diameter 157.99 mm
6.22 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 0.5 mm
0.02 in
a - Effective Center Location 8.4 mm
0.33 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 27300 N
6140 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 97500 N
21900 lbf
C0 - Static Radial Rating 206000 N
46400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 18800 N
4230 lbf
Factors
K - Factor 1.34
e - ISO Factor 0.43
Y - ISO Factor 1.38
G1 - Heat Generation Factor (Roller-Raceway) 195
G2 - Heat Generation Factor (Rib-Roller End) 139
Cg - Geometry Factor 0.151

As TIMKEN bearing distributor, Nodes bearings have TIMKEN L624549-L624510-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products