FAG QJ207-XL-MPA bearings | Dimensions: 35x72x17mm
Also known as : QJ207-XL-MPA
- Inside Diameter: 35 mm
- Outside Diameter: 72 mm
- Width: 17 mm
- Basic dynamic load rating: 45 kN
- Basic static load rating: 35.5 kN
FAG QJ207-XL-MPA Bearing details
| Number | QJ207-XL-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, separable, with split inner ring |
|
| d | 35mm | |
| D | 72mm | |
| B | 17mm | |
| a | 38mm | |
| D1 | 59,1mm | |
| Da max | 65mm | |
| d1 | 48mm | |
| da min | 42mm | |
| ra max | 1mm | |
| rmin | 1,1mm | |
| α | 35° | Contact angle |
| m | 0,359kg | Mass |
| Cr | 45000N | Basic dynamic load rating, radial |
| C0r | 35500N | Basic static load rating, radial |
| Cur | 2470N | Fatigue limit load, radial |
| nG | 180001/min | Limiting speed |
| nϑr | 85001/min | Reference speed |
Nodes bearings have FAG QJ207-XL-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, separable, with split inner ring.
FAG QJ207-XL-MPA bearing cross reference
FAG 7007-B-XL-TVP bearing
35mm x 62mm x 14mm
FAG 71807-B-TVH bearing
35mm x 47mm x 7mm
FAG 7207-B-XL-JP bearing
35mm x 72mm x 17mm
FAG 7207-B-MP-UA bearing
35mm x 72mm x 17mm
FAG 7207-B-XL-TVP bearing
35mm x 72mm x 17mm
FAG 7307-B-XL-JP bearing
35mm x 80mm x 21mm
FAG 7307-B-XL-MP bearing
35mm x 80mm x 21mm
FAG 7307-B-XL-TVP bearing
35mm x 80mm x 21mm
FAG 7407-B-XL-MP bearing
35mm x 100mm x 25mm
NSK QJ207 bearing
35mm x 72mm x 17mm
FAG B7007-C-T-P4S bearing
35mm x 62mm x 14mm
