FAG deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies.
These FAG bearing products, which are of simple design, robust in operation and easy to maintain, are available in single and double row designs and in open and sealed variants. Due to the manufacturing processes used, open bearings can have turned recesses in the outer ring for seals or shields. Due to their low frictional torque, deep groove ball bearings are suitable for high speeds.
Due to the raceway geometry and the balls used as rolling elements, deep groove ball bearings can support axial loads in both directions as well as radial loads
FAG deep groove ball bearing products
FAG Single row deep groove ball bearings are the most frequently used type of rolling bearing. They are produced in numerous sizes and designs and are particularly economical. Deep groove ball bearings with the suffix 2Z have gap seals on both sides and are suitable for high speeds.
FAG double row deep groove ball bearings correspond in their structure and function to a pair of single row deep groove ball bearings. They are designed for high to very high speeds and are used where the load carrying capacity of single row deep groove ball bearings is not sufficient.Double row deep groove ball bearings are wider than single row deep groove ball bearings of the same bore and outside diameter but have a significantly higher load carrying capacity.
related articles
- Matched FAG single row deep groove ball bearings
- FAG deep groove ball bearing operating temperature
- FAG deep groove ball bearing cage and suffixes
Related numbers
FAG 6205-C-2ZC3 bearing
25mm x 52mm x 15mm
FAG 6000-2RSR bearing
10mm x 26mm x 8mm
FAG 6002-2RSR bearing
15mm x 32mm x 9mm
FAG 6208-2RSR bearing
40mm x 80mm x 18mm
FAG 6309-2RSR bearing
45mm x 100mm x 25mm
FAG 62200-2RSR bearing
10mm x 30mm x 14mm
FAG 62204-2RSR bearing
20mm x 47mm x 18mm
