FAG HS71912-C-T-P4S Bearing

FAG HS71912-C-T-P4S spindle bearings | 60x85x13mm

Also known as : HS71912-C-T-P4S

• Inside Diameter: 60 mm
• Outside Diameter: 85 mm
• Width: 13 mm
• Basic dynamic load rating: 13.4 kN
• Basic static load rating: 9.2 kN

Inquire Now

FAG HS71912-C-T-P4S Bearing

Number	HS71912-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	60 mm
D	85 mm
B	13 mm
a	16,2 mm
Da	80,5 mm	Tolerance: H12
da	65 mm	Tolerance: h12
Etk max	70,4 mm
Etk min	69,2 mm
Etk1 max	70,4 mm
Etk1 min	67,1 mm
r1 min	1 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	1 mm
α	15 °	Contact angle
m	0,2 kg	≈ Mass
Cr	13400 N	Basic dynamic load rating, radial
C0r	9200 N	Basic static load rating, radial
Cur	940 N	Fatigue limit load, radial
nG Fett	22000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	34000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	47 N	Preload force
FV M	141 N	Preload force
FV H	281 N	Preload force
KaE L	140 N	Lift-off force
KaE M	442 N	Lift-off force
KaE H	920 N	Lift-off force
ca L	39,5 N/µm	Axial rigidity
ca M	62,1 N/µm	Axial rigidity
ca H	85 N/µm	Axial rigidity

Nodes bearings have FAG HS71912-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.