FAG HSS71915-C-T-P4S Bearing

FAG HSS71915-C-T-P4S spindle bearings | 75x105x16mm

Also known as : HSS71915-C-T-P4S

  • Inside Diameter: 75 mm
  • Outside Diameter: 105 mm
  • Width: 16 mm
  • Basic dynamic load rating: 18.3 kN
  • Basic static load rating: 13.8 kN

Inquire Now


FAG HSS71915-C-T-P4S Bearing

FAG HSS71915-C-T-P4S Bearing details

Number HSS71915-C-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
 
d 75 mm   
D 105 mm   
B 16 mm   
a 20,1 mm   
Da 99,5 mm  Tolerance: H12
da 81 mm  Tolerance: h12
r1 min 1 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 1 mm   
α 15 °  Contact angle
m 0,421 kg  ≈ Mass
Cr 18300 N  Basic dynamic load rating, radial
C0r 13800 N  Basic static load rating, radial
Cur 1420 N  Fatigue limit load, radial
nG Fett 18000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 64 N  Preload force
FV M 191 N  Preload force
FV H 382 N  Preload force
KaE L 190 N  Lift-off force
KaE M 597 N  Lift-off force
KaE H 1242 N  Lift-off force
ca L 49,5 N/µm  Axial rigidity
ca M 77,5 N/µm  Axial rigidity
ca H 106 N/µm  Axial rigidity

Nodes bearings have FAG HSS71915-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71915-C-T-P4S bearing cross reference

NSK 7915C bearing
75mm x 105mm x 16mm
NSK 7915CDB bearing
75mm x 105mm x 16mm
NSK 7915CDF bearing
75mm x 105mm x 16mm
NSK 7915A5DT bearing
75mm x 105mm x 16mm
NSK 7915CDT bearing
75mm x 105mm x 16mm
FAG B7015-C-T-P4S bearing
75mm x 115mm x 20mm
FAG B71915-C-T-P4S bearing
75mm x 105mm x 16mm
FAG B7215-C-T-P4S bearing
75mm x 130mm x 25mm
FAG B7015-E-T-P4S bearing
75mm x 115mm x 20mm
FAG B71915-E-T-P4S bearing
75mm x 105mm x 16mm
FAG B7215-E-T-P4S bearing
75mm x 130mm x 25mm

FAG spindle bearings

Related Information

Product search