SKF single row deep groove ball bearing cages

SKF single row deep groove ball bearings are fitted with one of the cages shown below.

  Steel cages Polymer cages Brass cages
  Steel cages, Ribbontype, ball centred Steel cages, Riveted, ball centred, Standard a Polymer cages, Snap-type, ball centred, PA66 Polymer cages, Snap-type, ball centred, PA66 Polymer cages, Snap-type, ball centred, PEEK Brass cages
Cage type Ribbon-
type, ball
centred
Riveted, ball
centred
Snap-type,
ball centred
Snap-type,
ball centred
Snap-type,
ball centred
Riveted,
ball, outer
ring or inner
ring centred
Material Stamped
steel
Stamped
steel
PA66, glass
fibre reinforced
PA46, glass
fibre reinforced
PEEK, glass
fibre
reinforced
Machined
brass
Suffix TN9 VG1561 TNH M, MA or MB
Metric
bearing
Standard Standard Standard for
ICOS oil sealed
bearing units,
check availability
for other
bearings
Standard for
SKF E2
bearings, check
availability for
other bearings
Check
availability
Standard
Inch
bearing
Standard Standard

The standard stamped steel cage is not identified in the bearing designation. If non-standard cages are required, check availability prior to ordering.

The lubricants generally used for rolling bearings do not have a detrimental effect on cage properties. However, some synthetic oils and greases with a synthetic oil base and lubricants containing EP additives, when used at high temperatures, can have a detrimental effect on polyamide cages.

Share



Related products

Related numbers

SKF 6203-2Z bearing
17mm x 40mm x 12mm
SKF 6203-2ZC3 bearing
17mm x 40mm x 12mm
SKF 6204-2RSH bearing
20mm x 47mm x 14mm
SKF 6205-2RS1 bearing
25mm x 52mm x 15mm
SKF 6205-2Z bearing
25mm x 52mm x 15mm
SKF 6206-2RS1 bearing
30mm x 62mm x 16mm
SKF 6206-2Z bearing
30mm x 62mm x 16mm
SKF 608-2Z bearing
8mm x 22mm x 7mm