FAG 695-2Z Bearing

FAG 695-2Z Deep groove ball bearing

Also known as : 695ZZ

  • Inside Diameter: 5 mm
  • Outside Diameter: 13 mm
  • Width: 4 mm
  • Basic dynamic load rating: 1080 kN
  • Basic static load rating: 430 kN

Inquire Now


FAG 695-2Z Bearing

FAG 695-2Z Bearing details

Part Number 695-2Z
Brand FAG
Catagory Deep groove ball bearing 69..-2Z, single row, shields, steel sheet metal cage
d 5 mm, Bore diameter
D 13 mm, Outside diameter
B 4 mm, Width
Cr 1080 N, Basic dynamic load rating, radial
C0r 430 N, Basic static load rating, radial
Cur 17.5 N, Fatigue load limit, radial
Limiting speed 63000 1/min
Reference speed 1/min
Weight 2.31 g
Other Dimensions
rmin 0.2 mm, Minimum chamfer dimension
D2 11.2 mm, Caliber diameter outer ring
Mounting dimensions
da min 6.4 mm, Minimum diameter shaft shoulder
Da max 11.6 mm, Maximum diameter of housing shoulder
ra max 0.2 mm, Maximum diameter of housing shoulder
Calculation factors
f0 13.4, Calculation factor

FAG 695-2Z, Deep groove ball bearing 69..-2Z, single row, shields, steel sheet metal cage.

  • Sealing: 2Z, -
  • Cage: JN, steel sheet metal
  • Tolerance: PN, Normal (PN)
  • Dimensional / heat stabilization: SN, Rings dimensional stabilized up to 120°
  • Lubricant: L138, Grease (L138/customer specific)
  • Radial internal clearance: CN, Group N (CN)

 

FAG 695-2Z bearing cross reference

FAG 635 bearing
5mm x 19mm x 6mm
FAG 625 bearing
5mm x 16mm x 5mm
NSK 695 bearing
5.0mm x 13mm x 4.0mm
NSK 695DD bearing
5mm x 13mm x 4mm
NSK 695VV bearing
5mm x 13mm x 4mm
NSK 695ZZ bearing
5.0mm x 13mm x 4.0mm