Lubricant for FAG bearings

Lubrication and maintenance are important for the reliable operation and long operating life of FAG and INA rolling bearings. Functions of the lubricant The lubricant should: form a lubricant film on the contact surfaces that is sufficiently capable...

Date: 2021-07-15

Schaeffler X-life rolling bearings

Schaeffler X-life rolling bearings of the brands INA and FAG are products with a particularly high performance density, which are identified by the premium brand XL. Their enhanced quality and performance are not, however, a special additional techni...

Date: 2021-05-21

INA axial angular contact ball bearings

INA axial angular contact ball bearings are precision bearings for screw drive bearing arrangements. Depending on the series, they can support radial forces as well as axial forces in one or both directions....

Date: 2020-09-08

FAG bearing calculator

Schaeffler Group introduced the Expanded calculation of the adjusted rating life in 1997. This method was standardised for the first time in DIN ISO 281 Appendix 1 and has been a constituent part of the international standard ISO 281 since 2007. The...

Date: 2019-08-26

Preload of FAG precision bearing

Rigidly adjusted FAG precision bearing arrangements, especially those with a short spacing between the bearings, react with a high degree of sensitivity to temperatures between the shaft and housing, since the preload within the FAG bearing set may i...

Date: 2018-11-01

Design and applications of FAG super precision bearings

In practical application, a large number of different FAG spindle bearing arrangements are used. The selection and arrangement are determined by their specific use in turning, milling and grinding or in high frequency motor spindles. The design of th...

Date: 2018-10-30

Lubrication of FAG super precision bearings

Lubrication and maintenance are important in order to achieve reliable function, an adequate operating life, wear-free running and a low vibration level in FAG super precision bearings . An essential precondition here is the formation of a lubricant...

Date: 2018-10-26

FAG spindle bearings designation

The designations of FAG spindle bearings consist of basic designation with supplementary designations. The designations for FAG spindle bearings is shown on the above diagram....

Date: 2018-10-22

FAG super precision bearings speeds

The achievable speeds are dependent on the overall energy balance in the system. The decisive factors are: the number of bearings the arrangement of the bearings the internal load (preload class) the external load the lubrication the heat dissipation...

Date: 2018-10-10

FAG spindle bearing types

FAG universal spindle bearings are available in the following designs: B, RS and H bearings. B spindle bearings Classical spindle bearing With large balls Contact angle 15 and 25 High load carrying capacity and high rigidity For moderate speed level....

Date: 2018-07-02

Contact angle of FAG spindle bearings

FAG spindle bearings can support axial loads in one direction as well as radial loads. If FAG spindle bearings are used in an O or X arrangement, they can support axial forces in both directions as well as moments. Bearings in a tandem arrangement ca...

Date: 2018-07-02

FAG spindle bearings accuracy, tolerance

The main dimensions of the FAG spindle bearings. The dimensional tolerances of the bearings correspond to tolerance class P4, the running tolerances correspond to tolerance class P2....

Date: 2018-07-02

design of FAG self aligning ball bearings

Recommended shaft tolerances for radial FAG self aligning ball bearings with cylindrical bore. see table in Shaft and housing tolerances The dimension tables give the maximum dimension of theradiusraand the diameters of theabutment shoulders Daand da...

Date: 2018-01-30

FAG self aligning ball bearings accuracy

The main dimensions of the bearings conform toDIN630. The dimensional and geometrical tolerances of the bearings correspond totolerance class PNtoDIN620-2. In FAG self aligning ball bearings series112, the bearing bore has a J7 tolerance. Radial inte...

Date: 2018-01-30

Selection of FAG bearing arrangement

The guidance and support of a rotating shaft requires at least two bearings arranged at a certain distance from each other. ...

Date: 2017-12-18

Shaft and housing tolerances

tables of shaft and housing tolerances; Shaft tolerances for radial bearings with cylindrical bore, for axial bearings; Housing tolerances radial bearings, for axial bearings. ...

Date: 2017-12-18