FAG QJ1022-N2-MPA bearings | Dimensions: 110x170x28mm
Also known as : QJ1022-N2-MPA
- Inside Diameter: 110 mm
- Outside Diameter: 170 mm
- Width: 28 mm
- Basic dynamic load rating: 138 kN
- Basic static load rating: 184 kN
FAG QJ1022-N2-MPA Bearing
FAG QJ1022-N2-MPA Bearing details
| Number | QJ1022-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 110mm | |
| D | 170mm | |
| B | 28mm | |
| 45° | Groove angle | |
| a | 98mm | |
| an | 6,5mm | |
| bn | 6,5mm | |
| D1 | 149,8mm | |
| Da max | 161mm | |
| d1 | 131,3mm | |
| da min | 119mm | |
| ra max | 2mm | |
| rmin | 2mm | |
| rn | 0,5mm | |
| α | 35° | Contact angle |
| m | 2,524kg | Mass |
| Cr | 138000N | Basic dynamic load rating, radial |
| C0r | 184000N | Basic static load rating, radial |
| Cur | 8100N | Fatigue limit load, radial |
| nG | 69001/min | Limiting speed |
| nϑr | 33501/min | Reference speed |
Nodes bearings have FAG QJ1022-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ1022-N2-MPA bearing cross reference
FAG 7222-B-XL-JP bearing
110mm x 200mm x 38mm
FAG 7222-B-MP-UO bearing
110mm x 200mm x 38mm
FAG 7222-B-XL-TVP bearing
110mm x 200mm x 38mm
FAG 7322-B-XL-JP bearing
110mm x 240mm x 50mm
FAG 7322-B-MP bearing
110mm x 240mm x 50mm
FAG 7322-B-XL-TVP bearing
110mm x 240mm x 50mm
NSK QJ1022 bearing
110mm x 170mm x 28mm
FAG B7022-C-T-P4S bearing
110mm x 170mm x 28mm
FAG B71922-C-T-P4S bearing
110mm x 150mm x 20mm
FAG B7222-C-T-P4S bearing
110mm x 200mm x 38mm
FAG B7022-E-T-P4S bearing
110mm x 170mm x 28mm