FAG B71917-E-2RSD-T-P4S Bearing

FAG B71917-E-2RSD-T-P4S spindle bearings | 85x120x18mm

Also known as : B71917-E-2RSD-T-P4S

  • Inside Diameter: 85 mm
  • Outside Diameter: 120 mm
  • Width: 18 mm
  • Basic dynamic load rating: 44.5 kN
  • Basic static load rating: 31.5 kN

Inquire Now

FAG B71917-E-2RSD-T-P4S Bearing

FAG B71917-E-2RSD-T-P4S Bearing details

Number B71917-E-2RSD-T-P4S  
Type FAG spindle bearings, adjusted, in pairs or sets  
d 85 mm   
D 120 mm   
B 18 mm   
a 32,9 mm   
Da 114 mm  Tolerance: H12
da 92 mm  Tolerance: h12
r1 min 1,1 mm   
ra max 0,6 mm   
ra1 max 0,6 mm   
rmin 1,1 mm   
α 25 °  Contact angle
m 0,53 kg  ≈ Mass
Cr 44500 N  Basic dynamic load rating, radial
C0r 31500 N  Basic static load rating, radial
Cur 3200 N  Fatigue limit load, radial
nG Fett 10000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 333 N  Preload force
FV M 1226 N  Preload force
FV H 2609 N  Preload force
KaE L 968 N  Lift-off force
KaE M 3675 N  Lift-off force
KaE H 8074 N  Lift-off force
ca L 184 N/µm  Axial rigidity
ca M 301 N/µm  Axial rigidity
ca H 409 N/µm  Axial rigidity

Nodes bearings have FAG B71917-E-2RSD-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.

FAG B71917-E-2RSD-T-P4S bearing cross reference

FAG B7017-C-T-P4S bearing
85mm x 130mm x 22mm
FAG B71917-C-T-P4S bearing
85mm x 120mm x 18mm
FAG B7217-C-T-P4S bearing
85mm x 150mm x 28mm
FAG B7017-E-T-P4S bearing
85mm x 130mm x 22mm
FAG B71917-E-T-P4S bearing
85mm x 120mm x 18mm
FAG B7217-E-T-P4S bearing
85mm x 150mm x 28mm
FAG HS7017-C-T-P4S bearing
85mm x 130mm x 22mm
FAG HS71917-C-T-P4S bearing
85mm x 120mm x 18mm
FAG HS7017-E-T-P4S bearing
85mm x 130mm x 22mm

FAG spindle bearings

Related Information

Product search