FAG B71944-E-T-P4S spindle bearings | 220x300x38mm
Also known as : B71944-E-T-P4S
- Inside Diameter: 220 mm
- Outside Diameter: 300 mm
- Width: 38 mm
- Basic dynamic load rating: 212 kN
- Basic static load rating: 192 kN
FAG B71944-E-T-P4S Bearing
FAG B71944-E-T-P4S Bearing details
| Number | B71944-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 220 mm | |
| D | 300 mm | |
| B | 38 mm | |
| a | 79,6 mm | |
| Da | 286 mm | Tolerance: H12 |
| da | 234 mm | Tolerance: h12 |
| Etk max | 253,1 mm | |
| Etk min | 244,7 mm | |
| Etk1 max | 253,1 mm | |
| Etk1 min | 244,7 mm | |
| r1 min | 1,1 mm | |
| ra max | 1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 25 ° | Contact angle |
| m | 6,58 kg | ≈ Mass |
| Cr | 212000 N | Basic dynamic load rating, radial |
| C0r | 192000 N | Basic static load rating, radial |
| Cur | 12200 N | Fatigue limit load, radial |
| nG Fett | 3800 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 6000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1705 N | Preload force |
| FV M | 6060 N | Preload force |
| FV H | 12777 N | Preload force |
| KaE L | 4937 N | Lift-off force |
| KaE M | 18042 N | Lift-off force |
| KaE H | 39132 N | Lift-off force |
| ca L | 461 N/µm | Axial rigidity |
| ca M | 739 N/µm | Axial rigidity |
| ca H | 995 N/µm | Axial rigidity |
Nodes bearings have FAG B71944-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B71944-E-T-P4S bearing cross reference
FAG B7044-C-T-P4S bearing
220mm x 340mm x 56mm
FAG B71944-C-T-P4S bearing
220mm x 300mm x 38mm
FAG B7244-C-T-P4S bearing
220mm x 400mm x 65mm
FAG B7044-E-T-P4S bearing
220mm x 340mm x 56mm