FAG B7202-C-T-P4S Bearing

FAG B7202-C-T-P4S spindle bearings | 15x35x11mm

Also known as : B7202-C-T-P4S

• Inside Diameter: 15 mm
• Outside Diameter: 35 mm
• Width: 11 mm
• Basic dynamic load rating: 11.6 kN
• Basic static load rating: 5 kN

Inquire Now

FAG B7202-C-T-P4S Bearing

Number	B7202-C-T-P4S
Type	FAG spindle bearings, adjusted, in pairs or sets
d	15 mm
D	35 mm
B	11 mm
a	8,8 mm
Da	30,5 mm	Tolerance: H12
da	19,5 mm	Tolerance: h12
Etk max	23,4 mm
Etk min	21,7 mm
Etk1 max	23,4 mm
Etk1 min	21,7 mm
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,044 kg	≈ Mass
Cr	11600 N	Basic dynamic load rating, radial
C0r	5000 N	Basic static load rating, radial
Cur	520 N	Fatigue limit load, radial
nG Fett	45000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	67000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	46 N	Preload force
FV M	158 N	Preload force
FV H	319 N	Preload force
KaE L	144 N	Lift-off force
KaE M	543 N	Lift-off force
KaE H	1177 N	Lift-off force
ca L	22,1 N/µm	Axial rigidity
ca M	39,3 N/µm	Axial rigidity
ca H	57 N/µm	Axial rigidity

Nodes bearings have FAG B7202-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.