FAG B7214-C-T-P4S Bearing

FAG B7214-C-T-P4S spindle bearings | 70x125x24mm

Also known as : B7214-C-T-P4S

  • Inside Diameter: 70 mm
  • Outside Diameter: 125 mm
  • Width: 24 mm
  • Basic dynamic load rating: 71 kN
  • Basic static load rating: 41.5 kN

Inquire Now


FAG B7214-C-T-P4S Bearing

FAG B7214-C-T-P4S Bearing details

NumberB7214-C-T-P4S
TypeFAG spindle bearings, adjusted, in pairs or sets
d70 mm  
D125 mm  
B24 mm  
a25,1 mm  
Da115 mm Tolerance: H12
da80 mm Tolerance: h12
Etk max93,6 mm  
Etk min88 mm  
Etk1 max93,6 mm  
Etk1 min88 mm  
r1 min1,5 mm  
ra max1,5 mm  
ra1 max0,6 mm  
rmin1,5 mm  
α15 ° Contact angle
m1,1 kg ≈ Mass
Cr71000 N Basic dynamic load rating, radial
C0r41500 N Basic static load rating, radial
Cur4250 N Fatigue limit load, radial
nG Fett11000 1/min Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl18000 1/min Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L399 N Preload force
FV M1269 N Preload force
FV H2524 N Preload force
KaE L1238 N Lift-off force
KaE M4260 N Lift-off force
KaE H9062 N Lift-off force
ca L83,1 N/µm Axial rigidity
ca M141 N/µm Axial rigidity
ca H201 N/µm Axial rigidity

Nodes bearings have FAG B7214-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.

FAG B7214-C-T-P4S bearing cross reference

FAG B7014-C-T-P4S bearing
70mm x 110mm x 20mm
FAG B71914-C-T-P4S bearing
70mm x 100mm x 16mm
FAG B7014-E-T-P4S bearing
70mm x 110mm x 20mm
FAG B71914-E-T-P4S bearing
70mm x 100mm x 16mm
FAG B7214-E-T-P4S bearing
70mm x 125mm x 24mm
FAG HS7014-C-T-P4S bearing
70mm x 110mm x 20mm

FAG spindle bearings

Related Information

Product search