FAG B7221-E-T-P4S spindle bearings | 105x190x36mm
Also known as : B7221-E-T-P4S
- Inside Diameter: 105 mm
- Outside Diameter: 190 mm
- Width: 36 mm
- Basic dynamic load rating: 156 kN
- Basic static load rating: 99 kN
FAG B7221-E-T-P4S Bearing
FAG B7221-E-T-P4S Bearing details
| Number | B7221-E-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 105 mm | |
| D | 190 mm | |
| B | 36 mm | |
| a | 52,4 mm | |
| Da | 174,5 mm | Tolerance: H12 |
| da | 120,5 mm | Tolerance: h12 |
| Etk max | 141,2 mm | |
| Etk min | 132,2 mm | |
| Etk1 max | 141,2 mm | |
| Etk1 min | 132,2 mm | |
| r1 min | 2,1 mm | |
| ra max | 2,1 mm | |
| ra1 max | 1 mm | |
| rmin | 2,1 mm | |
| α | 25 ° | Contact angle |
| m | 3,88 kg | ≈ Mass |
| Cr | 156000 N | Basic dynamic load rating, radial |
| C0r | 99000 N | Basic static load rating, radial |
| Cur | 8400 N | Fatigue limit load, radial |
| nG Fett | 6300 1/min |
Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 9500 1/min |
Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1545 N | Preload force |
| FV M | 5006 N | Preload force |
| FV H | 10249 N | Preload force |
| KaE L | 4508 N | Lift-off force |
| KaE M | 15092 N | Lift-off force |
| KaE H | 31918 N | Lift-off force |
| ca L | 312 N/µm | Axial rigidity |
| ca M | 488 N/µm | Axial rigidity |
| ca H | 656 N/µm | Axial rigidity |
Nodes bearings have FAG B7221-E-T-P4S spindle bearings in stock, FAG bearings, precision bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.
FAG B7221-E-T-P4S bearing cross reference
FAG B7021-C-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-C-T-P4S bearing
105mm x 145mm x 20mm
FAG B7221-C-T-P4S bearing
105mm x 190mm x 36mm
FAG B7021-E-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-E-T-P4S bearing
105mm x 145mm x 20mm
FAG B7021-E-2RSD-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-E-2RSD-T-P4S bearing
105mm x 145mm x 20mm
FAG B7021-C-2RSD-T-P4S bearing
105mm x 160mm x 26mm
FAG B71921-C-2RSD-T-P4S bearing
105mm x 145mm x 20mm
FAG HS7021-C-T-P4S bearing
105mm x 160mm x 26mm
FAG HS71921-C-T-P4S bearing
105mm x 145mm x 20mm