FAG B7238-C-T-P4S spindle bearings | 190x340x55mm
Also known as : B7238-C-T-P4S
- Inside Diameter: 190 mm
- Outside Diameter: 340 mm
- Width: 55 mm
- Basic dynamic load rating: 320 kN
- Basic static load rating: 290 kN
FAG B7238-C-T-P4S Bearing
FAG B7238-C-T-P4S Bearing details
| Number | B7238-C-T-P4S | |
|---|---|---|
| Type | FAG spindle bearings, adjusted, in pairs or sets | |
| d | 190 mm | |
| D | 340 mm | |
| B | 55 mm | |
| a | 63 mm | |
| Da | 306,5 mm | Tolerance: H12 |
| da | 223,5 mm | Tolerance: h12 |
| Etk max | 255,3 mm | |
| Etk min | 242,1 mm | |
| Etk1 max | 255,3 mm | |
| Etk1 min | 242,1 mm | |
| r1 min | 4 mm | |
| ra max | 3 mm | |
| ra1 max | 3 mm | |
| rmin | 4 mm | |
| α | 15 ° | Contact angle |
| m | 20 kg | ≈ Mass |
| Cr | 320000 N | Basic dynamic load rating, radial |
| C0r | 290000 N | Basic static load rating, radial |
| Cur | 18300 N | Fatigue limit load, radial |
| nG Fett | 3400 1/min | Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings. |
| nG Öl | 5000 1/min | Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings. |
| FV L | 1846 N | Preload force |
| FV M | 5864 N | Preload force |
| FV H | 11779 N | Preload force |
| KaE L | 5614 N | Lift-off force |
| KaE M | 19073 N | Lift-off force |
| KaE H | 40669 N | Lift-off force |
| ca L | 201 N/µm | Axial rigidity |
| ca M | 333 N/µm | Axial rigidity |
| ca H | 468 N/µm | Axial rigidity |
Nodes bearings have FAG B7238-C-T-P4S spindle bearings in stock, precision bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.
FAG B7238-C-T-P4S bearing cross reference
FAG B7038-C-T-P4S bearing
190mm x 290mm x 46mm
FAG B71938-C-T-P4S bearing
190mm x 260mm x 33mm
FAG B7038-E-T-P4S bearing
190mm x 290mm x 46mm
FAG B71938-E-T-P4S bearing
190mm x 260mm x 33mm