FAG HS7012-C-T-P4S Bearing

FAG HS7012-C-T-P4S spindle bearings | 60x95x18mm

Also known as : HS7012-C-T-P4S

• Inside Diameter: 60 mm
• Outside Diameter: 95 mm
• Width: 18 mm
• Basic dynamic load rating: 18.6 kN
• Basic static load rating: 12.5 kN

Inquire Now

FAG HS7012-C-T-P4S Bearing

Number	HS7012-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	60 mm
D	95 mm
B	18 mm
a	19,4 mm
Da	88 mm	Tolerance: H12
da	67 mm	Tolerance: h12
Etk max	75,3 mm
Etk min	73,5 mm
Etk1 max	75,3 mm
Etk1 min	70,9 mm
r1 min	1,1 mm
ra max	1 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,433 kg	≈ Mass
Cr	18600 N	Basic dynamic load rating, radial
C0r	12500 N	Basic static load rating, radial
Cur	1280 N	Fatigue limit load, radial
nG Fett	20000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	32000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	65 N	Preload force
FV M	194 N	Preload force
FV H	388 N	Preload force
KaE L	194 N	Lift-off force
KaE M	609 N	Lift-off force
KaE H	1269 N	Lift-off force
ca L	44,8 N/µm	Axial rigidity
ca M	70,5 N/µm	Axial rigidity
ca H	96,4 N/µm	Axial rigidity

Nodes bearings have FAG HS7012-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.