FAG HS71920-C-T-P4S Bearing

FAG HS71920-C-T-P4S spindle bearings | 100x140x20mm

Also known as : HS71920-C-T-P4S

• Inside Diameter: 100 mm
• Outside Diameter: 140 mm
• Width: 20 mm
• Basic dynamic load rating: 28.5 kN
• Basic static load rating: 23.5 kN

Inquire Now

FAG HS71920-C-T-P4S Bearing

Number	HS71920-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, restricted tolerances
d	100 mm
D	140 mm
B	20 mm
a	26,1 mm
Da	133 mm	Tolerance: H12
da	107 mm	Tolerance: h12
Etk max	116,9 mm
Etk min	115,2 mm
Etk1 max	116,9 mm
Etk1 min	112,3 mm
r1 min	1,1 mm
ra max	0,6 mm
ra1 max	0,6 mm
rmin	1,1 mm
α	15 °	Contact angle
m	0,86 kg	≈ Mass
Cr	28500 N	Basic dynamic load rating, radial
C0r	23500 N	Basic static load rating, radial
Cur	2200 N	Fatigue limit load, radial
nG Fett	13000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
nG Öl	20000 1/min	Limiting speed for minimal quantity oil lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	97 N	Preload force
FV M	291 N	Preload force
FV H	583 N	Preload force
KaE L	289 N	Lift-off force
KaE M	906 N	Lift-off force
KaE H	1883 N	Lift-off force
ca L	64,6 N/µm	Axial rigidity
ca M	101 N/µm	Axial rigidity
ca H	137 N/µm	Axial rigidity

Nodes bearings have FAG HS71920-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, restricted tolerances.