FAG HS71926-E-T-P4S Bearing

FAG HS71926-E-T-P4S spindle bearings | 130x180x24mm

Also known as : HS71926-E-T-P4S

  • Inside Diameter: 130 mm
  • Outside Diameter: 180 mm
  • Width: 24 mm
  • Basic dynamic load rating: 38.5 kN
  • Basic static load rating: 34.5 kN

Inquire Now


FAG HS71926-E-T-P4S Bearing

FAG HS71926-E-T-P4S Bearing details

Number HS71926-E-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 25°, restricted tolerances
 
d 130 mm   
D 180 mm   
B 24 mm   
a 48,1 mm   
Da 171 mm  Tolerance: H12
da 139 mm  Tolerance: h12
Etk max 151,4 mm   
Etk min 149,3 mm   
Etk1 max 151,4 mm   
Etk1 min 145,8 mm   
r1 min 1,5 mm   
ra max 0,6 mm   
ra1 max 0,6 mm   
rmin 1,5 mm   
α 25 °  Contact angle
m 1,71 kg  ≈ Mass
Cr 38500 N  Basic dynamic load rating, radial
C0r 34500 N  Basic static load rating, radial
Cur 2850 N  Fatigue limit load, radial
nG Fett 9000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
nG Öl 14000 1/min  Limiting speed for minimal quantity oil lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 224 N  Preload force
FV M 673 N  Preload force
FV H 1346 N  Preload force
KaE L 645 N  Lift-off force
KaE M 1968 N  Lift-off force
KaE H 4004 N  Lift-off force
ca L 205 N/µm  Axial rigidity
ca M 303 N/µm  Axial rigidity
ca H 393 N/µm  Axial rigidity

Nodes bearings have FAG HS71926-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, restricted tolerances.

FAG HS71926-E-T-P4S bearing cross reference

NSK 7926C bearing
130mm x 180mm x 24mm
NSK 7926CDB bearing
130mm x 180mm x 24mm
NSK 7926CDF bearing
130mm x 180mm x 24mm
NSK 7926A5DT bearing
130mm x 180mm x 24mm
NSK 7926CDT bearing
130mm x 180mm x 24mm
NSK 7926A5DT bearing
130mm x 180mm x 24mm
NSK 7926CDT bearing
130mm x 180mm x 24mm
FAG B7026-C-T-P4S bearing
130mm x 200mm x 33mm
FAG B71926-C-T-P4S bearing
130mm x 180mm x 24mm
FAG B7226-C-T-P4S bearing
130mm x 230mm x 40mm
FAG B7026-E-T-P4S bearing
130mm x 200mm x 33mm
FAG B71926-E-T-P4S bearing
130mm x 180mm x 24mm

FAG spindle bearings

Related Information

Product search