FAG HSS7003-C-T-P4S Bearing

FAG HSS7003-C-T-P4S spindle bearings | 17x35x10mm

Also known as : HSS7003-C-T-P4S

• Inside Diameter: 17 mm
• Outside Diameter: 35 mm
• Width: 10 mm
• Basic dynamic load rating: 3.55 kN
• Basic static load rating: 1.6 kN

Inquire Now

FAG HSS7003-C-T-P4S Bearing

Number	HSS7003-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	17 mm
D	35 mm
B	10 mm
a	8,5 mm
Da	32 mm	Tolerance: H12
da	21 mm	Tolerance: h12
r1 min	0,3 mm
ra max	0,3 mm
ra1 max	0,1 mm
rmin	0,3 mm
α	15 °	Contact angle
m	0,045 kg	≈ Mass
Cr	3550 N	Basic dynamic load rating, radial
C0r	1600 N	Basic static load rating, radial
Cur	165 N	Fatigue limit load, radial
nG Fett	63000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	13 N	Preload force
FV M	38 N	Preload force
FV H	76 N	Preload force
KaE L	38 N	Lift-off force
KaE M	121 N	Lift-off force
KaE H	253 N	Lift-off force
ca L	14,3 N/µm	Axial rigidity
ca M	22,7 N/µm	Axial rigidity
ca H	31,3 N/µm	Axial rigidity

Nodes bearings have FAG HSS7003-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.