FAG HSS7004-C-T-P4S Bearing

FAG HSS7004-C-T-P4S spindle bearings | 20x42x12mm

Also known as : HSS7004-C-T-P4S

• Inside Diameter: 20 mm
• Outside Diameter: 42 mm
• Width: 12 mm
• Basic dynamic load rating: 5.7 kN
• Basic static load rating: 2.7 kN

Inquire Now

FAG HSS7004-C-T-P4S Bearing

Number	HSS7004-C-T-P4S
Type	FAG spindle bearings adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d	20 mm
D	42 mm
B	12 mm
a	10,2 mm
Da	37 mm	Tolerance: H12
da	25 mm	Tolerance: h12
r1 min	0,6 mm
ra max	0,6 mm
ra1 max	0,3 mm
rmin	0,6 mm
α	15 °	Contact angle
m	0,083 kg	≈ Mass
Cr	5700 N	Basic dynamic load rating, radial
C0r	2700 N	Basic static load rating, radial
Cur	280 N	Fatigue limit load, radial
nG Fett	53000 1/min	Limiting speed for grease lubrication The limiting speeds are based on elastically preloaded single bearings.
FV L	21 N	Preload force
FV M	62 N	Preload force
FV H	125 N	Preload force
KaE L	63 N	Lift-off force
KaE M	198 N	Lift-off force
KaE H	413 N	Lift-off force
ca L	19,8 N/µm	Axial rigidity
ca M	31,5 N/µm	Axial rigidity
ca H	43,5 N/µm	Axial rigidity

Nodes bearings have FAG HSS7004-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.