FAG HSS71912-E-T-P4S Bearing

FAG HSS71912-E-T-P4S spindle bearings | 60x85x13mm

Also known as : HSS71912-E-T-P4S

  • Inside Diameter: 60 mm
  • Outside Diameter: 85 mm
  • Width: 13 mm
  • Basic dynamic load rating: 12.6 kN
  • Basic static load rating: 8.7 kN

Inquire Now


FAG HSS71912-E-T-P4S Bearing

FAG HSS71912-E-T-P4S Bearing details

Number HSS71912-E-T-P4S  
Type FAG spindle bearings
adjusted, in pairs or sets, contact angle a = 25°, lip seals on both sides, non-contact, restricted tolerances
 
d 60 mm   
D 85 mm   
B 13 mm   
a 23,4 mm   
Da 80,5 mm  Tolerance: H12
da 65 mm  Tolerance: h12
r1 min 1 mm   
ra max 0,6 mm   
ra1 max 0,3 mm   
rmin 1 mm   
α 25 °  Contact angle
m 0,235 kg  ≈ Mass
Cr 12600 N  Basic dynamic load rating, radial
C0r 8700 N  Basic static load rating, radial
Cur 890 N  Fatigue limit load, radial
nG Fett 20000 1/min  Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L 76 N  Preload force
FV M 228 N  Preload force
FV H 455 N  Preload force
KaE L 219 N  Lift-off force
KaE M 670 N  Lift-off force
KaE H 1368 N  Lift-off force
ca L 98,8 N/µm  Axial rigidity
ca M 147 N/µm  Axial rigidity
ca H 192 N/µm  Axial rigidity

Nodes bearings have FAG HSS71912-E-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 25°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71912-E-T-P4S bearing cross reference

NSK 7912C bearing
60mm x 85mm x 13mm
NSK 7912CDB bearing
60mm x 85mm x 13mm
NSK 7912CDF bearing
60mm x 85mm x 13mm
NSK 7912A5DT bearing
60mm x 85mm x 13mm
NSK 7912CDT bearing
60mm x 85mm x 13mm
FAG B7012-C-T-P4S bearing
60mm x 95mm x 18mm
FAG B71912-C-T-P4S bearing
60mm x 85mm x 13mm
FAG B7212-C-T-P4S bearing
60mm x 110mm x 22mm
FAG B7012-E-T-P4S bearing
60mm x 95mm x 18mm
FAG B71912-E-T-P4S bearing
60mm x 85mm x 13mm
FAG B7212-E-T-P4S bearing
60mm x 110mm x 22mm

FAG spindle bearings

Related Information

Product search