FAG HSS71917-C-T-P4S Bearing

FAG HSS71917-C-T-P4S spindle bearings | 85x120x18mm

Also known as : HSS71917-C-T-P4S

  • Inside Diameter: 85 mm
  • Outside Diameter: 120 mm
  • Width: 18 mm
  • Basic dynamic load rating: 21.2 kN
  • Basic static load rating: 17 kN

Inquire Now


FAG HSS71917-C-T-P4S Bearing

FAG HSS71917-C-T-P4S Bearing details

NumberHSS71917-C-T-P4S
TypeFAG spindle bearings
adjusted, in pairs or sets, contact angle a = 15°, lip seals on both sides, non-contact, restricted tolerances
d85 mm  
D120 mm  
B18 mm  
a22,7 mm  
Da114 mm Tolerance: H12
da92 mm Tolerance: h12
r1 min1,1 mm  
ra max0,6 mm  
ra1 max0,6 mm  
rmin1,1 mm  
α15 ° Contact angle
m0,631 kg ≈ Mass
Cr21200 N Basic dynamic load rating, radial
C0r17000 N Basic static load rating, radial
Cur1720 N Fatigue limit load, radial
nG Fett15000 1/min Limiting speed for grease lubrication

The limiting speeds are based on elastically preloaded single bearings.
FV L74 N Preload force
FV M221 N Preload force
FV H442 N Preload force
KaE L220 N Lift-off force
KaE M689 N Lift-off force
KaE H1433 N Lift-off force
ca L55,9 N/µm Axial rigidity
ca M87,4 N/µm Axial rigidity
ca H119 N/µm Axial rigidity

Nodes bearings have FAG HSS71917-C-T-P4S spindle bearings in stock, FAG bearings, precision spindle bearings, adjusted, in pairs or sets, contact angle α = 15°, lip seals on both sides, non-contact, restricted tolerances.

FAG HSS71917-C-T-P4S bearing cross reference

NSK 7917C bearing
85mm x 120mm x 18mm
NSK 7917CDB bearing
85mm x 120mm x 18mm
NSK 7917CDF bearing
85mm x 120mm x 18mm
NSK 7917A5DT bearing
85mm x 120mm x 18mm
NSK 7917CDT bearing
85mm x 120mm x 18mm
FAG B7017-C-T-P4S bearing
85mm x 130mm x 22mm
FAG B71917-C-T-P4S bearing
85mm x 120mm x 18mm
FAG B7217-C-T-P4S bearing
85mm x 150mm x 28mm
FAG B7017-E-T-P4S bearing
85mm x 130mm x 22mm
FAG B71917-E-T-P4S bearing
85mm x 120mm x 18mm
FAG B7217-E-T-P4S bearing
85mm x 150mm x 28mm

FAG spindle bearings

Related Information

Product search