IKO Crossed Roller Bearings are compact bearings with their rollers alternately crossed at right angles to each other between inner and outer rings. They can take loads from any directions at the same time such as radial, thrust and moment loads. The rollers make line-contact with raceway surfaces, and, therefore, elastic deformation due to bearing loads is very small. These bearings are widely used in the rotating parts of industrial robots, machine tools, medical equipment, etc., which require compactness, high rigidity and high rotational accuracy.
IKO CRBF 5515 AT, CRBF 5515 ATUU crossed roller bearings
Nodes bearings has IKO CRBF 5515 AT and CRBF 5515 ATUU crossed roller bearings in stock, dimensions: 55mm x 120mm x 15mm, C: 20.1 KN, C0: 27.7 KN.
- Brand: IKO
- Inside Diameter: 55 mm
- Outside Diameter: 120 mm
- Width: 15 mm
- Basic dynamic load rating: 20.1 kN
- Basic static load rating: 20.1 kN
IKO CRBF 8022 AT, CRBF 8022 ATUU crossed roller bearings
Nodes bearings has IKO CRBF 8022 AT and CRBF 8022 ATUU crossed roller bearings in stock, dimensions: 80mm x 165mm x 22mm, C: 51.1 KN, C0: 72 KN.
- Brand: IKO
- Inside Diameter: 80 mm
- Outside Diameter: 165 mm
- Width: 22 mm
- Basic dynamic load rating: 51.1 kN
- Basic static load rating: 51.1 kN
IKO CRBF 8022 A, CRBF 8022 AUU crossed roller bearings
Nodes bearings has IKO CRBF 8022 A and CRBF 8022 AUU crossed roller bearings in stock, dimensions: 80mm x 165mm x 22mm, C: 51.1 KN, C0: 72 KN.
- Brand: IKO
- Inside Diameter: 80 mm
- Outside Diameter: 165 mm
- Width: 22 mm
- Basic dynamic load rating: 51.1 kN
- Basic static load rating: 51.1 kN