INA ZKLF30100-2RS-XL Bearing

INA ZKLF30100-2RS-XL bearing | 30x100x38 mm

Also known as : ZKLF30100-2RS-XL

• Inside Diameter: 30 mm
• Outside Diameter: 100 mm
• Width: 38 mm
• Basic dynamic load rating: 65 kN
• Basic static load rating: 108 kN

Inquire Now

INA ZKLF30100-2RS-XL Bearing

Number	ZKLF30100-2RS-XL
Type	Axial angular contact ball bearings double direction, for screw mounting, lip seals on both sides
d	30mm	Tolerance: 0/-0,005
D	100mm	Tolerance: 0/-0,01
B	38mm	Tolerance: 0/-0,25
	M6	Threaded connector for lubrication
	60°	Contact angle
	M8	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data.
b	3mm
Da max	64mm
d1	51mm
d2	8,8mm
da min	47mm
I	30mm
J	80mm
naxta	8 x 45°	Fixing screws to DIN EN ISO 4762 10.9 Screws not included in scope of delivery. Tightening torque according to manufacturer’s data. Number of holes in adjacent construction corresponds to n a.
n x t	8 x 45°	Pitch
r1 min	0,6mm
rmin	0,3mm
t1	0,2mm
		Heavy series
m	1,63kg	≈ Mass
Ca	65000N	Basic dynamic load rating, axial
C0a	108000N	Basic static load rating, axial
Cua	6500N	Fatigue limit load, axial
nG Fett	45001/min	Limiting speed for grease lubrication
nϑ	21001/min	Thermally safe operating speed
MRL	0,8Nm	Bearing frictional torque
caL	950N/µm	Axial rigidity
ckL	400Nm/mrad	Tilting rigidity
Mm	1,91kg * cm^2	Mass moment of inertia for rotating inner ring
	2,5µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZMA30/52	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM30	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	65Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	19509N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLF30100-2RS-XL ball screw support bearings in stock. ZKLF30100-2RS-XL, Axial angular contact ball bearings.