INA ZKLN1545-2RS-XL Bearing

INA ZKLN1545-2RS-XL bearing | 15x45x25 mm

Also known as : ZKLN1545-2RS-XL

• Inside Diameter: 15 mm
• Outside Diameter: 45 mm
• Width: 25 mm
• Basic dynamic load rating: 19.6 kN
• Basic static load rating: 28 kN

Inquire Now

INA ZKLN1545-2RS-XL Bearing

Number	ZKLN1545-2RS-XL
Type	Axial angular contact ball bearings double direction, lip seals on both sides
d	15mm	Tolerance: 0/-0,005
D	45mm	Tolerance: 0/-0,010
B	25mm	Tolerance: 0/-0,25
	60°	Contact angle
Da max	35mm
d1	28mm
da min	20mm
r1 min	0,6mm
rmin	0,3mm
m	0,21kg	≈ Mass
Ca	19600N	Basic dynamic load rating, axial
C0a	28000N	Basic static load rating, axial
Cua	1700N	Fatigue limit load, axial
nG Fett	82001/min	Limiting speed for grease lubrication
nϑ	35001/min	Thermally safe operating speed
MRL	0,2Nm	Bearing frictional torque
caL	400N/µm	Axial rigidity
ckL	65Nm/mrad	Tilting rigidity
Mm	0,102kg * cm^2	Mass moment of inertia for rotating inner ring
	2µm	Axial runout The axial runout data for screw drive bearing arrangements are based on the rotating inner ring.
	ZM15	Recommended INA precision locknuts with radial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
	AM15	Recommended INA precision locknuts with axial clamping The recommended INA precision locknuts are not included in the scope of delivery and must be ordered separately.
MA	10Nm	Tightening torque Only valid in conjunction with INA precision locknuts. Observe the guidelines on locating/locating bearing arrangements.
	5484N	Requisite locknut force, axial The requisite axial locknut force must be observed when using other locknuts.

As INA bearing distributor, Nodes bearings have INA ZKLN1545-2RS-XL ball screw support bearings in stock. ZKLN1545-2RS-XL, Axial angular contact ball bearings.