NSK HR30321J roller bearings | 105x225x53.5 mm
Also known as : 30321J2
- Inside Diameter: 105 mm
- Outside Diameter: 225 mm
- Width: 53.5 mm
- Basic dynamic load rating: 455 kN
- Basic static load rating: 565 kN
NSK HR30321J Bearing
NSK HR30321J Bearing details
| model | HR30321J |
|---|---|
| d | 105 mm |
| D | 225 mm |
| T | 53.5 mm |
| B | 49 mm |
| C | 41 mm |
| Cone rmin. | 4 mm |
| Cup rmin. | 3 mm |
| Cr |
455000 N 46500 kgf |
| C0r |
565000 N 57500 kgf |
| Limiting speeds |
1600 min-1 (Grease) |
| Limiting speeds |
2200 min-1 (Oil) |
|
ISO355 Dimensions Series approx. |
2GB |
| e | 0.35 (constant) |
| y1 | 1.7 (Axial Load Factors) |
| y0 | 0.96 (Axial Load Factors) |
| Mass | 9.52 kg (approx.) |
NSK HR30321J roller bearings, tapered roller bearing, Single-Row Metric Design.
NSK HR30321J bearing cross reference
NSK HR32221J bearing
105mm x 190mm x 53mm
NSK HR32221J bearing
105mm x 190mm x 53mm
FAG 30321 bearing
105mm x 225mm x 53.5mm
FAG 30321-XL bearing
105mm x 225mm x 53.5mm
NSK HR32921J bearing
105mm x 145mm x 25mm
NSK HR32021XJ bearing
105mm x 160mm x 35mm
NSK HR33021J bearing
105mm x 160mm x 43mm
NSK HR30221J bearing
105mm x 190mm x 39mm
NSK HR31321J bearing
105mm x 225mm x 58mm