TIMKEN LM67043-LM67010 Bearing

TIMKEN LM67043-LM67010 tapered roller bearings

Also known as : LM67043-LM67010

• Inside Diameter: 28.575 mm
• Outside Diameter: 59.131 mm
• Width: 15.875 mm
• Basic dynamic load rating: 36.5 kN
• Basic static load rating: 44.6 kN

Inquire Now

TIMKEN LM67043-LM67010 Bearing

Series	LM67000
model	LM67043-LM67010
Cone Part Number	LM67043
Cup Part Number	LM67010
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.200 Kg 0.4 lb
Dimensions
d - Bore	28.575 mm 1.1250 in
D - Cup Outer Diameter	59.131 mm 2.3280 in
B - Cone Width	16.764 mm 0.6600 in
C - Cup Width	11.811 mm 0.4650 in
T - Bearing Width	15.875 mm 0.6250 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	0.000 mm 0.000 in
r - Cup Backface "To Clear" Radius	1.27 mm 0.050 in
da - Cone Frontface Backing Diameter	35.05 mm 1.38 in
db - Cone Backface Backing Diameter	41.40 mm 1.63 in
Da - Cup Frontface Backing Diameter	55.90 mm 2.24 in
Db - Cup Backface Backing Diameter	52.07 mm 2.05 in
Ab - Cage-Cone Frontface Clearance	0.76 mm 0.03 in
Aa - Cage-Cone Backface Clearance	0.76 mm 0.03 in
a - Effective Center Location	-3 mm -0.12 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	9460 N 2130 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	36500 N 8210 lbf
C0 - Static Radial Rating	44600 N 10000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	6680 N 1500 lbf
Factors
K - Factor	1.42
e - ISO Factor	0.41
Y - ISO Factor	1.46
G1 - Heat Generation Factor (Roller-Raceway)	12.8
G2 - Heat Generation Factor (Rib-Roller End)	9.93
Cg - Geometry Factor	0.0612

TIMKEN LM67043-LM67010 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.