TIMKEN M88048A-M88010 Bearing

TIMKEN M88048A-M88010 tapered roller bearings

Also known as : M88048A-M88010

  • Inside Diameter: 33.338 mm
  • Outside Diameter: 68.263 mm
  • Width: 22.225 mm
  • Basic dynamic load rating: 76.3 kN
  • Basic static load rating: 77.4 kN

Inquire Now

TIMKEN M88048A-M88010 Bearing

TIMKEN M88048A-M88010 Bearing details

Series M88000
model M88048A-M88010
Cone Part Number M88048A
Cup Part Number M88010
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.400 Kg
0.80 lb
Dimensions
d - Bore 33.338 mm
1.3125 in
D - Cup Outer Diameter 68.263 mm
2.6875 in
B - Cone Width 22.225 mm
0.8750 in
C - Cup Width 17.463 mm
0.6875 in
T - Bearing Width 22.225 mm
0.8750 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.270 mm
0.050 in
r - Cup Backface "To Clear" Radius 1.52 mm
0.06 in
da - Cone Frontface Backing Diameter 41.15 mm
1.62 in
db - Cone Backface Backing Diameter 43.43 mm
1.71 in
Da - Cup Frontface Backing Diameter 66.00 mm
2.60 in
Db - Cup Backface Backing Diameter 57.91 mm
2.28 in
Ab - Cage-Cone Frontface Clearance 1.5 mm
0.06 in
Aa - Cage-Cone Backface Clearance 1.3 mm
0.05 in
a - Effective Center Location -2.80 mm
-0.11 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 19800 N
4450 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 76300 N
17100 lbf
C0 - Static Radial Rating 77400 N
17400 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 18500 N
4160 lbf
Factors
K - Factor 1.07
e - ISO Factor 0.55
Y - ISO Factor 1.1
G1 - Heat Generation Factor (Roller-Raceway) 19.4
G2 - Heat Generation Factor (Rib-Roller End) 10
Cg - Geometry Factor 0.0771

TIMKEN M88048A-M88010 bearings, TS (Tapered Single) Imperial, Tapered roller bearings.

Related products