TIMKEN 15118-15250-B Bearing

TIMKEN 15118-15250-B tapered bearings with Flange

Also known as : 15118-15250-B

  • Inside Diameter: 30.213 mm
  • Outside Diameter: 63.5 mm
  • Width: 8.73 mm
  • Basic dynamic load rating: 59.9 kN
  • Basic static load rating: 53.9 kN

Inquire Now

TIMKEN 15118-15250-B Bearing

TIMKEN 15118-15250-B Bearing details

Series 15000
model 15118-15250-B
Cone Part Number 15118
Cup Part Number 15250-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.400 Kg
0.80 lb
Dimensions
d - Bore 30.213 mm
1.1895 in
D - Cup Outer Diameter 63.500 mm
2.5000 in
D1 - Flange Outer Diameter 67.366 mm
2.6522 in
B - Cone Width 20.638 mm
0.8125 in
C - Cup Width 15.875 mm
0.6250 in
C1 - Cup Flange Width 3.967 mm
0.1562 in
T - Bearing Width to Flange 8.730 mm
0.3437 in
T1 - Bearing Width 20.638 mm
0.8125 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 1.30 mm
0.050 in
da - Cone Frontface Backing Diameter 36.60 mm
1.44 in
db - Cone Backface Backing Diameter 42.90 mm
1.69 in
Da - Cup Frontface Backing Diameter 59.94 mm
2.40 in
Ab - Cage-Cone Frontface Clearance 1.8 mm
0.07 in
Aa - Cage-Cone Backface Clearance 0.8 mm
0.03 in
a - Effective Center Location -5.8 mm
-0.23 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 15500 N
3490 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 59900 N
13500 lbf
C0 - Static Radial Rating 53900 N
12100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 9310 N
2090 lbf
Factors
K - Factor 1.67
e - ISO Factor 0.35
Y - ISO Factor 1.71
G1 - Heat Generation Factor (Roller-Raceway) 14.6
G2 - Heat Generation Factor (Rib-Roller End) 7.58
Cg - Geometry Factor 0.0606

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 15118-15250-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products