TIMKEN 26126-26283-B Bearing

TIMKEN 26126-26283-B tapered bearings with Flange

Also known as : 26126-26283-B

  • Inside Diameter: 32.004 mm
  • Outside Diameter: 71.999 mm
  • Width: 7.087 mm
  • Basic dynamic load rating: 58.8 kN
  • Basic static load rating: 60.1 kN

Inquire Now

TIMKEN 26126-26283-B Bearing

TIMKEN 26126-26283-B Bearing details

Series 26000
model 26126-26283-B
Cone Part Number 26126
Cup Part Number 26283-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.200 Kg
0.50 lb
Dimensions
d - Bore 32.004 mm
1.2600 in
D - Cup Outer Diameter 71.999 mm
2.8346 in
D1 - Flange Outer Diameter 75.857 mm
2.9865 in
B - Cone Width 18.923 mm
0.7450 in
C - Cup Width 15.875 mm
0.6250 in
C1 - Cup Flange Width 3.962 mm
0.1560 in
T - Bearing Width to Flange 7.087 mm
0.2790 in
T1 - Bearing Width 18.999 mm
0.7480 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.5 mm
0.06 in
da - Cone Frontface Backing Diameter 37.60 mm
1.48 in
db - Cone Backface Backing Diameter 39.60 mm
1.56 in
Da - Cup Frontface Backing Diameter 66.04 mm
2.62 in
Ab - Cage-Cone Frontface Clearance 2.3 mm
0.09 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location -4.1 mm
-0.16 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 15200 N
3420 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 58800 N
13200 lbf
C0 - Static Radial Rating 60100 N
13500 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 9390 N
2110 lbf
Factors
K - Factor 1.62
e - ISO Factor 0.36
Y - ISO Factor 1.67
G1 - Heat Generation Factor (Roller-Raceway) 16.1
G2 - Heat Generation Factor (Rib-Roller End) 10.1
Cg - Geometry Factor 0.063

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 26126-26283-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products