TIMKEN 2984-2924-B Bearing

TIMKEN 2984-2924-B tapered bearings with Flange

Also known as : 2984-2924-B

  • Inside Diameter: 46.038 mm
  • Outside Diameter: 85.001 mm
  • Width: 9.525 mm
  • Basic dynamic load rating: 93.3 kN
  • Basic static load rating: 117 kN

Inquire Now

TIMKEN 2984-2924-B Bearing

TIMKEN 2984-2924-B Bearing details

Series 2900
model 2984-2924-B
Cone Part Number 2984
Cup Part Number 2924-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.300 Kg
2.90 lb
Dimensions
d - Bore 46.038 mm
1.8125 in
D - Cup Outer Diameter 85.001 mm
3.3465 in
D1 - Flange Outer Diameter 89.764 mm
3.5340 in
B - Cone Width 25.608 mm
1.0082 in
C - Cup Width 20.638 mm
0.8125 in
C1 - Cup Flange Width 4.763 mm
0.1875 in
T - Bearing Width to Flange 9.525 mm
0.3750 in
T1 - Bearing Width 25.400 mm
1.0000 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 3.600 mm
0.14 in
r - Cup Backface "To Clear" Radius 1.30 mm
0.050 in
da - Cone Frontface Backing Diameter 52.10 mm
2.05 in
db - Cone Backface Backing Diameter 57.90 mm
2.28 in
Da - Cup Frontface Backing Diameter 82.04 mm
3.27 in
Ab - Cage-Cone Frontface Clearance 2 mm
0.08 in
Aa - Cage-Cone Backface Clearance 1.3 mm
0.05 in
a - Effective Center Location -6.4 mm
-0.25 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 24200 N
5440 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 93300 N
21000 lbf
C0 - Static Radial Rating 117000 N
26200 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 14300 N
3220 lbf
Factors
K - Factor 1.69
e - ISO Factor 0.35
Y - ISO Factor 1.73
G1 - Heat Generation Factor (Roller-Raceway) 38.2
G2 - Heat Generation Factor (Rib-Roller End) 15.7
Cg - Geometry Factor 0.0832

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 2984-2924-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products