TIMKEN 335-S-332-B Bearing

TIMKEN 335-S-332-B tapered bearings with Flange

Also known as : 335-S-332-B

  • Inside Diameter: 33.338 mm
  • Outside Diameter: 80 mm
  • Width: 7.938 mm
  • Basic dynamic load rating: 94.3 kN
  • Basic static load rating: 83.4 kN

Inquire Now


TIMKEN 335-S-332-B Bearing

TIMKEN 335-S-332-B Bearing details

Series 335
model 335-S-332-B
Cone Part Number 335-S
Cup Part Number 332-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.300 Kg
0.60 lb
Dimensions
d - Bore 33.338 mm
1.3125 in
D - Cup Outer Diameter 80 mm
3.1496 in
D1 - Flange Outer Diameter 84.658 mm
3.3330 in
B - Cone Width 22.403 mm
0.8820 in
C - Cup Width 17.826 mm
0.7018 in
C1 - Cup Flange Width 4.763 mm
0.1875 in
T - Bearing Width to Flange 7.938 mm
0.3125 in
T1 - Bearing Width 21.001 mm
0.8268 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 0.800 mm
0.03 in
r - Cup Backface "To Clear" Radius 0.80 mm
0.030 in
da - Cone Frontface Backing Diameter 40.40 mm
1.59 in
db - Cone Backface Backing Diameter 40.90 mm
1.61 in
Da - Cup Frontface Backing Diameter 77.47 mm
3.05 in
Ab - Cage-Cone Frontface Clearance 1.8 mm
0.07 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location -6.4 mm
-0.25 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 24400 N
5490 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 94300 N
21200 lbf
C0 - Static Radial Rating 83400 N
18700 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 11400 N
2570 lbf
Factors
K - Factor 2.14
e - ISO Factor 0.27
Y - ISO Factor 2.2
G1 - Heat Generation Factor (Roller-Raceway) 26.5
G2 - Heat Generation Factor (Rib-Roller End) 13
Cg - Geometry Factor 0.0676

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 335-S-332-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

TIMKEN bearing cross reference

TIMKEN 335-332-B bearing
34.925mm x 80mm x 7.938mm