TIMKEN 3474-3420-B Bearing

TIMKEN 3474-3420-B tapered bearings with Flange

Also known as : 3474-3420-B

  • Inside Diameter: 30.163 mm
  • Outside Diameter: 79.375 mm
  • Width: 10.32 mm
  • Basic dynamic load rating: 105 kN
  • Basic static load rating: 119 kN

Inquire Now


TIMKEN 3474-3420-B Bearing

TIMKEN 3474-3420-B Bearing details

Series 3400
model 3474-3420-B
Cone Part Number 3474
Cup Part Number 3420-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 1.000 Kg
2.20 lb
Dimensions
d - Bore 30.163 mm
1.1875 in
D - Cup Outer Diameter 79.375 mm
3.1250 in
D1 - Flange Outer Diameter 84.049 mm
3.3090 in
B - Cone Width 29.771 mm
1.1721 in
C - Cup Width 23.813 mm
0.9375 in
C1 - Cup Flange Width 4.763 mm
0.1875 in
T - Bearing Width to Flange 10.320 mm
0.4063 in
T1 - Bearing Width 29.370 mm
1.1563 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 0.800 mm
0.03 in
r - Cup Backface "To Clear" Radius 3.30 mm
0.130 in
da - Cone Frontface Backing Diameter 39.90 mm
1.57 in
db - Cone Backface Backing Diameter 40.90 mm
1.61 in
Da - Cup Frontface Backing Diameter 75.95 mm
3.03 in
Ab - Cage-Cone Frontface Clearance 1.3 mm
0.05 in
Aa - Cage-Cone Backface Clearance 1 mm
0.04 in
a - Effective Center Location -8.6 mm
-0.34 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 27100 N
6100 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 105000 N
23500 lbf
C0 - Static Radial Rating 119000 N
26800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 17000 N
3820 lbf
Factors
K - Factor 1.6
e - ISO Factor 0.37
Y - ISO Factor 1.64
G1 - Heat Generation Factor (Roller-Raceway) 29.9
G2 - Heat Generation Factor (Rib-Roller End) 11.2
Cg - Geometry Factor 0.0781

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3474-3420-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

TIMKEN bearing cross reference

TIMKEN 3474-3426 bearing
30.163mm x 79.324mm x 29.370mm
TIMKEN 3474-3420 bearing
30.163mm x 79.375mm x 29.370mm
TIMKEN 3474-3422 bearing
30.163mm x 80.167mm x 29.370mm
TIMKEN 3474-3431 bearing
30.163mm x 82.550mm x 29.370mm
TIMKEN 3474-3423D bearing
30.163mm x 82.550mm x 66.678mm
TIMKEN 3474-3424YD bearing
30.163mm x 82.550mm x 66.678mm