TIMKEN 3477-3420-B Bearing

TIMKEN 3477-3420-B tapered bearings with Flange

Also known as : 3477-3420-B

• Inside Diameter: 33.338 mm
• Outside Diameter: 79.375 mm
• Width: 10.32 mm
• Basic dynamic load rating: 105 kN
• Basic static load rating: 119 kN

Inquire Now

TIMKEN 3477-3420-B Bearing

Series	3400
model	3477-3420-B
Cone Part Number	3477
Cup Part Number	3420-B
Design Units	Imperial
Cage Type	Stamped Steel
Bearing Weight	0.900 Kg 2.00 lb
Dimensions
d - Bore	33.338 mm 1.3125 in
D - Cup Outer Diameter	79.375 mm 3.1250 in
D1 - Flange Outer Diameter	84.049 mm 3.3090 in
B - Cone Width	29.771 mm 1.1721 in
C - Cup Width	23.813 mm 0.9375 in
C1 - Cup Flange Width	4.763 mm 0.1875 in
T - Bearing Width to Flange	10.320 mm 0.4063 in
T1 - Bearing Width	29.370 mm 1.1563 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius	3.600 mm 0.14 in
r - Cup Backface "To Clear" Radius	3.30 mm 0.130 in
da - Cone Frontface Backing Diameter	42.40 mm 1.67 in
db - Cone Backface Backing Diameter	49 mm 1.93 in
Da - Cup Frontface Backing Diameter	75.95 mm 3.03 in
Ab - Cage-Cone Frontface Clearance	1.3 mm 0.05 in
Aa - Cage-Cone Backface Clearance	1 mm 0.04 in
a - Effective Center Location	-8.6 mm -0.34 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions)	27100 N 6100 lbf
C1 - Dynamic Radial Rating (1 million revolutions)	105000 N 23500 lbf
C0 - Static Radial Rating	119000 N 26800 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)	17000 N 3820 lbf
Factors
K - Factor	1.6
e - ISO Factor	0.37
Y - ISO Factor	1.64
G1 - Heat Generation Factor (Roller-Raceway)	29.9
G2 - Heat Generation Factor (Rib-Roller End)	11.2
Cg - Geometry Factor	0.0781

As TIMKEN bearing distributor, Nodes bearings have TIMKEN 3477-3420-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.