TIMKEN L305649-L305610-B Bearing

TIMKEN L305649-L305610-B tapered bearings with Flange

Also known as : L305649-L305610-B

  • Inside Diameter: 50.8 mm
  • Outside Diameter: 80.963 mm
  • Width: 7.145 mm
  • Basic dynamic load rating: 60.8 kN
  • Basic static load rating: 88.8 kN

Inquire Now

TIMKEN L305649-L305610-B Bearing

TIMKEN L305649-L305610-B Bearing details

Series L305600
model L305649-L305610-B
Cone Part Number L305649
Cup Part Number L305610-B
Design Units Imperial
Cage Type Stamped Steel
Bearing Weight 0.400 Kg
0.80 lb
Dimensions
d - Bore 50.8 mm
2 in
D - Cup Outer Diameter 80.963 mm
3.1875 in
D1 - Flange Outer Diameter 84.036 mm
3.3085 in
B - Cone Width 18.258 mm
0.7188 in
C - Cup Width 14.288 mm
0.5625 in
C1 - Cup Flange Width 3.175 mm
0.1250 in
T - Bearing Width to Flange 7.145 mm
0.2813 in
T1 - Bearing Width 18.258 mm
0.7188 in
Abutment and Fillet Dimensions
R - Cone Backface "To Clear" Radius 1.5 mm
0.06 in
r - Cup Backface "To Clear" Radius 1.5 mm
0.06 in
da - Cone Frontface Backing Diameter 55.90 mm
2.2 in
db - Cone Backface Backing Diameter 57.90 mm
2.28 in
Da - Cup Frontface Backing Diameter 78.99 mm
3.11 in
Ab - Cage-Cone Frontface Clearance 2.5 mm
0.1 in
Aa - Cage-Cone Backface Clearance 0 mm
0 in
a - Effective Center Location -2.5 mm
-0.1 in
Basic Load Ratings
C90 - Dynamic Radial Rating (90 million revolutions) 15800 N
3540 lbf
C1 - Dynamic Radial Rating (1 million revolutions) 60800 N
13700 lbf
C0 - Static Radial Rating 88800 N
20000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions) 9590 N
2160 lbf
Factors
K - Factor 1.64
e - ISO Factor 0.36
Y - ISO Factor 1.69
G1 - Heat Generation Factor (Roller-Raceway) 38.8
G2 - Heat Generation Factor (Rib-Roller End) 27.8
Cg - Geometry Factor 0.0841

As TIMKEN bearing distributor, Nodes bearings have TIMKEN L305649-L305610-B bearings in stock, TSF (Tapered Single with Flange) Imperial , Tapered roller bearings.

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.

related articles

Related products