FAG QJ338-N2-MPA bearings | Dimensions: 190x400x78mm
Also known as : QJ338-N2-MPA
- Inside Diameter: 190 mm
- Outside Diameter: 400 mm
- Width: 78 mm
- Basic dynamic load rating: 740 kN
- Basic static load rating: 1250 kN
FAG QJ338-N2-MPA Bearing
FAG QJ338-N2-MPA Bearing details
| Number | QJ338-N2-MPA | |
|---|---|---|
| Type |
Four point contact bearings main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots |
|
| d | 190mm | |
| D | 400mm | |
| B | 78mm | |
| 45° | Groove angle | |
| a | 207mm | |
| an | 12,7mm | |
| bn | 10,5mm | |
| D1 | 327mm | |
| Da max | 380mm | |
| d1 | 262,5mm | |
| da min | 210mm | |
| ra max | 4mm | |
| rmin | 5mm | |
| rn | 2mm | |
| α | 35° | Contact angle |
| m | 52,1kg | Mass |
| Cr | 740000N | Basic dynamic load rating, radial |
| C0r | 1250000N | Basic static load rating, radial |
| Cur | 40500N | Fatigue limit load, radial |
| nG | 28501/min | Limiting speed |
| nϑr | 13201/min | Reference speed |
Nodes bearings have FAG QJ338-N2-MPA bearings in stock, FAG bearings, main dimensions to DIN 628-4, can be dismantled, with split inner ring, with two retaining slots.
FAG QJ338-N2-MPA bearing cross reference
NSK QJ338 bearing
190mm x 400mm x 78mm
FAG B7038-C-T-P4S bearing
190mm x 290mm x 46mm
FAG B71938-C-T-P4S bearing
190mm x 260mm x 33mm
FAG B7238-C-T-P4S bearing
190mm x 340mm x 55mm
FAG B7038-E-T-P4S bearing
190mm x 290mm x 46mm
FAG B71938-E-T-P4S bearing
190mm x 260mm x 33mm
FAG B7238-E-T-P4S bearing
190mm x 340mm x 55mm
FAG QJ238-N2-MPA bearing
190mm x 340mm x 55mm