FAG 53218 thrust bearings | Dimensions: 90x135x38.5mm
Also known as : 53218
- Inside Diameter: 90 mm
- Outside Diameter: 135 mm
- Width: 38.5 mm
- Basic dynamic load rating: 119 kN
- Basic static load rating: 300 kN
FAG 53218 Bearing
FAG 53218 Bearing details
| Number | 53218 | |
|---|---|---|
| Type |
Axial deep groove ball bearings main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer, separable |
|
| d | 90mm | |
| D | 135mm | |
| T | 38,5mm | |
| A | 45mm | |
| D1 | 93mm | |
| Da max | 110mm | |
| d1 | 135mm | |
| da min | 117mm | |
| R | 100mm | |
| ra max | 1mm | |
| rmin | 1,1mm | |
| m | 1,7kg | Mass |
| Ca | 119000N | Basic dynamic load rating, axial |
| C0a | 300000N | Basic static load rating, axial |
| Cua | 13000N | Fatigue limit load, axial |
| nG | 29001/min | Limiting speed |
| nϑr | 37501/min | Reference speed |
| A | 0,54 | Minimum load factor |
Nodes bearings have FAG 53218 bearings in stock. 53218, Axial deep groove ball bearings, main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer, separable.
FAG 53218 bearing cross reference
NSK 53218 bearing
90mm x 135mm x 38.5mm
NSK 53218U bearing
90mm x 135mm x 42mm
FAG 51118 bearing
90mm x 120mm x 22mm
FAG 51218 bearing
90mm x 135mm x 35mm
FAG 51318 bearing
90mm x 155mm x 50mm
FAG 51418-MP bearing
90mm x 190mm x 77mm
FAG 53318 bearing
90mm x 155mm x 54.6mm
FAG 53218+U218 bearing
90mm x 140mm x 42mm