FAG 53244-MP+U244 thrust bearings | Dimensions: 220x310x75mm
Also known as : 53244-MP+U244
- Inside Diameter: 220 mm
- Outside Diameter: 310 mm
- Width: 75 mm
- Basic dynamic load rating: 335 kN
- Basic static load rating: 1330 kN
FAG 53244-MP+U244 Bearing
FAG 53244-MP+U244 Bearing details
| Number | 53244-MP+U244 | |
|---|---|---|
| Type |
Axial deep groove ball bearings main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer and seating washer, separable |
|
| d | 220mm | |
| D3 | 310mm | |
| T1 | 75mm | |
| A | 118mm | |
| C | 25mm | |
| D | 300mm | |
| D1 | 224mm | |
| D2 | 260mm | |
| Da max | 260mm | |
| d1 | 295mm | |
| da min | 268mm | |
| R | 225mm | |
| ra max | 2mm | |
| rmin | 2mm | |
| T | 65,6mm | |
| U244 | Designation, seating washer | |
| m | 13,1kg | Mass |
| m1 | 3,31kg | Mass, seating washer |
| Ca | 335000N | Basic dynamic load rating, axial |
| C0a | 1330000N | Basic static load rating, axial |
| Cua | 37500N | Fatigue limit load, axial |
| nG | 14201/min | Limiting speed |
| nϑr | 16901/min | Reference speed |
| A | 9,6 | Minimum load factor |
Nodes bearings have FAG 53244-MP+U244 bearings in stock. 53244-MP+U244, Axial deep groove ball bearings, main dimensions to DIN 711/ISO 104, single direction, with spherical housing locating washer and seating washer, separable.
FAG 53244-MP+U244 bearing cross reference
FAG 51144-MP bearing
220mm x 270mm x 37mm
FAG 51244-MP bearing
220mm x 300mm x 63mm
