FAG thrust bearings comprise shaft locating washers, housing locating washers and ball and cage assemblies. Axial deep groove ball bearings are not self-retaining; the ball and cage assembly and bearing washers can therefore be fitted separately.
In addition to the series with flat washers, series are also avaliable with spherical housing locating washers for the compensatin of static angular misalignment. These designs are normally used in conjunction with seating washers.
FAG axial deep groove ball bearings are available in single and double directions designs.
FAG 51156-MP thrust bearings | Dimensions: 280x350x53mm
Nodes bearings have FAG 51156-MP bearings in stock, Axial deep groove ball bearings, 51156-MP bearings dimensions: 280mm x 350mm x 53mm, Cr: 325000N, C0r: 1390000N.
- Brand: FAG
- Inside Diameter: 280 mm
- Outside Diameter: 350 mm
- Width: 53 mm
- Basic dynamic load rating: 325 kN
- Basic static load rating: 325 kN
FAG 51160-MP thrust bearings | Dimensions: 300x380x62mm
Nodes bearings have FAG 51160-MP bearings in stock, Axial deep groove ball bearings, 51160-MP bearings dimensions: 300mm x 380mm x 62mm, Cr: 360000N, C0r: 1620000N.
- Brand: FAG
- Inside Diameter: 300 mm
- Outside Diameter: 380 mm
- Width: 62 mm
- Basic dynamic load rating: 360 kN
- Basic static load rating: 360 kN
FAG 51164-MP thrust bearings | Dimensions: 320x400x63mm
Nodes bearings have FAG 51164-MP bearings in stock, Axial deep groove ball bearings, 51164-MP bearings dimensions: 320mm x 400mm x 63mm, Cr: 380000N, C0r: 1760000N.
- Brand: FAG
- Inside Diameter: 320 mm
- Outside Diameter: 400 mm
- Width: 63 mm
- Basic dynamic load rating: 380 kN
- Basic static load rating: 380 kN
FAG 51168-MP thrust bearings | Dimensions: 340x420x64mm
Nodes bearings have FAG 51168-MP bearings in stock, Axial deep groove ball bearings, 51168-MP bearings dimensions: 340mm x 420mm x 64mm, Cr: 380000N, C0r: 1810000N.
- Brand: FAG
- Inside Diameter: 340 mm
- Outside Diameter: 420 mm
- Width: 64 mm
- Basic dynamic load rating: 380 kN
- Basic static load rating: 380 kN
FAG 51172-MP thrust bearings | Dimensions: 360x440x65mm
Nodes bearings have FAG 51172-MP bearings in stock, Axial deep groove ball bearings, 51172-MP bearings dimensions: 360mm x 440mm x 65mm, Cr: 405000N, C0r: 2020000N.
- Brand: FAG
- Inside Diameter: 360 mm
- Outside Diameter: 440 mm
- Width: 65 mm
- Basic dynamic load rating: 405 kN
- Basic static load rating: 405 kN
FAG 51176-MP thrust bearings | Dimensions: 380x460x65mm
Nodes bearings have FAG 51176-MP bearings in stock, Axial deep groove ball bearings, 51176-MP bearings dimensions: 380mm x 460mm x 65mm, Cr: 430000N, C0r: 2230000N.
- Brand: FAG
- Inside Diameter: 380 mm
- Outside Diameter: 460 mm
- Width: 65 mm
- Basic dynamic load rating: 430 kN
- Basic static load rating: 430 kN
FAG 51180-MP thrust bearings | Dimensions: 400x480x65mm
Nodes bearings have FAG 51180-MP bearings in stock, Axial deep groove ball bearings, 51180-MP bearings dimensions: 400mm x 480mm x 65mm, Cr: 435000N, C0r: 2340000N.
- Brand: FAG
- Inside Diameter: 400 mm
- Outside Diameter: 480 mm
- Width: 65 mm
- Basic dynamic load rating: 435 kN
- Basic static load rating: 435 kN
FAG 51184-MP thrust bearings | Dimensions: 420x500x65mm
Nodes bearings have FAG 51184-MP bearings in stock, Axial deep groove ball bearings, 51184-MP bearings dimensions: 420mm x 500mm x 65mm, Cr: 440000N, C0r: 2440000N.
- Brand: FAG
- Inside Diameter: 420 mm
- Outside Diameter: 500 mm
- Width: 65 mm
- Basic dynamic load rating: 440 kN
- Basic static load rating: 440 kN
FAG 51188-MP thrust bearings | Dimensions: 440x540x80mm
Nodes bearings have FAG 51188-MP bearings in stock, Axial deep groove ball bearings, 51188-MP bearings dimensions: 440mm x 540mm x 80mm, Cr: 530000N, C0r: 3000000N.
- Brand: FAG
- Inside Diameter: 440 mm
- Outside Diameter: 540 mm
- Width: 80 mm
- Basic dynamic load rating: 530 kN
- Basic static load rating: 530 kN
FAG 51192-MP thrust bearings | Dimensions: 460x560x80mm
Nodes bearings have FAG 51192-MP bearings in stock, Axial deep groove ball bearings, 51192-MP bearings dimensions: 460mm x 560mm x 80mm, Cr: 530000N, C0r: 3100000N.
- Brand: FAG
- Inside Diameter: 460 mm
- Outside Diameter: 560 mm
- Width: 80 mm
- Basic dynamic load rating: 530 kN
- Basic static load rating: 530 kN
FAG 51196-MP thrust bearings | Dimensions: 480x580x80mm
Nodes bearings have FAG 51196-MP bearings in stock, Axial deep groove ball bearings, 51196-MP bearings dimensions: 480mm x 580mm x 80mm, Cr: 540000N, C0r: 3250000N.
- Brand: FAG
- Inside Diameter: 480 mm
- Outside Diameter: 580 mm
- Width: 80 mm
- Basic dynamic load rating: 540 kN
- Basic static load rating: 540 kN
FAG 511/500-MP thrust bearings | Dimensions: 500x600x80mm
Nodes bearings have FAG 511/500-MP bearings in stock, Axial deep groove ball bearings, 511/500-MP bearings dimensions: 500mm x 600mm x 80mm, Cr: 550000N, C0r: 3300000N.
- Brand: FAG
- Inside Diameter: 500 mm
- Outside Diameter: 600 mm
- Width: 80 mm
- Basic dynamic load rating: 550 kN
- Basic static load rating: 550 kN
FAG 511/530-MP thrust bearings | Dimensions: 530x640x85mm
Nodes bearings have FAG 511/530-MP bearings in stock, Axial deep groove ball bearings, 511/530-MP bearings dimensions: 530mm x 640mm x 85mm, Cr: 620000N, C0r: 3950000N.
- Brand: FAG
- Inside Diameter: 530 mm
- Outside Diameter: 640 mm
- Width: 85 mm
- Basic dynamic load rating: 620 kN
- Basic static load rating: 620 kN
FAG 511/560-MP thrust bearings | Dimensions: 560x670x85mm
Nodes bearings have FAG 511/560-MP bearings in stock, Axial deep groove ball bearings, 511/560-MP bearings dimensions: 560mm x 670mm x 85mm, Cr: 630000N, C0r: 4100000N.
- Brand: FAG
- Inside Diameter: 560 mm
- Outside Diameter: 670 mm
- Width: 85 mm
- Basic dynamic load rating: 630 kN
- Basic static load rating: 630 kN
FAG 511/600-MP thrust bearings | Dimensions: 600x710x85mm
Nodes bearings have FAG 511/600-MP bearings in stock, Axial deep groove ball bearings, 511/600-MP bearings dimensions: 600mm x 710mm x 85mm, Cr: 650000N, C0r: 4400000N.
- Brand: FAG
- Inside Diameter: 600 mm
- Outside Diameter: 710 mm
- Width: 85 mm
- Basic dynamic load rating: 650 kN
- Basic static load rating: 650 kN
FAG 511/630-MP thrust bearings | Dimensions: 630x750x95mm
Nodes bearings have FAG 511/630-MP bearings in stock, Axial deep groove ball bearings, 511/630-MP bearings dimensions: 630mm x 750mm x 95mm, Cr: 730000N, C0r: 5100000N.
- Brand: FAG
- Inside Diameter: 630 mm
- Outside Diameter: 750 mm
- Width: 95 mm
- Basic dynamic load rating: 730 kN
- Basic static load rating: 730 kN
FAG 511/670-MP thrust bearings | Dimensions: 670x800x105mm
Nodes bearings have FAG 511/670-MP bearings in stock, Axial deep groove ball bearings, 511/670-MP bearings dimensions: 670mm x 800mm x 105mm, Cr: 790000N, C0r: 5700000N.
- Brand: FAG
- Inside Diameter: 670 mm
- Outside Diameter: 800 mm
- Width: 105 mm
- Basic dynamic load rating: 790 kN
- Basic static load rating: 790 kN
FAG 511/750-MP thrust bearings | Dimensions: 750x900x120mm
Nodes bearings have FAG 511/750-MP bearings in stock, Axial deep groove ball bearings, 511/750-MP bearings dimensions: 750mm x 900mm x 120mm, Cr: 1010000N, C0r: 7900000N.
- Brand: FAG
- Inside Diameter: 750 mm
- Outside Diameter: 900 mm
- Width: 120 mm
- Basic dynamic load rating: 1010 kN
- Basic static load rating: 1010 kN
FAG 511/1120-MP thrust bearing | Dimensions: 1120x1320x160mm
Nodes bearings have FAG 511/1120-MP bearings in stock, Axial deep groove ball bearings, 511/1120-MP bearings dimensions: 1120mm x 1320mm x 160mm, Cr: 1500000N, C0r: 14700000N.
- Brand: FAG
- Inside Diameter: 1120 mm
- Outside Diameter: 1320 mm
- Width: 160 mm
- Basic dynamic load rating: 1500 kN
- Basic static load rating: 1500 kN
FAG 511/1250-MP thrust bearing | Dimensions: 1250x1460x175mm
Nodes bearings have FAG 511/1250-MP bearings in stock, Axial deep groove ball bearings, 511/1250-MP bearings dimensions: 1250mm x 1460mm x 175mm, Cr: 1730000N, C0r: 18200000N.
- Brand: FAG
- Inside Diameter: 1250 mm
- Outside Diameter: 1460 mm
- Width: 175 mm
- Basic dynamic load rating: 1730 kN
- Basic static load rating: 1730 kN
FAG 511/900-MP thrust bearings | Dimensions: 900x1060x130mm
Nodes bearings have FAG 511/900-MP bearings in stock, Axial deep groove ball bearings, 511/900-MP bearings dimensions: 900mm x 1060mm x 130mm, Cr: 1100000N, C0r: 9500000N.
- Brand: FAG
- Inside Diameter: 900 mm
- Outside Diameter: 1060 mm
- Width: 130 mm
- Basic dynamic load rating: 1100 kN
- Basic static load rating: 1100 kN
FAG 51203 thrust bearings | Dimensions: 17x35x12mm
Nodes bearings have FAG 51203 bearings in stock, Axial deep groove ball bearings, 51203 bearings dimensions: 17mm x 35mm x 12mm, Cr: 17200N, C0r: 27500N.
- Brand: FAG
- Inside Diameter: 17 mm
- Outside Diameter: 35 mm
- Width: 12 mm
- Basic dynamic load rating: 17.2 kN
- Basic static load rating: 17.2 kN
FAG 51202 thrust bearings | Dimensions: 15x32x12mm
Nodes bearings have FAG 51202 bearings in stock, Axial deep groove ball bearings, 51202 bearings dimensions: 15mm x 32mm x 12mm, Cr: 16600N, C0r: 24800N.
- Brand: FAG
- Inside Diameter: 15 mm
- Outside Diameter: 32 mm
- Width: 12 mm
- Basic dynamic load rating: 16.6 kN
- Basic static load rating: 16.6 kN
FAG 51201 thrust bearings | Dimensions: 12x28x11mm
Nodes bearings have FAG 51201 bearings in stock, Axial deep groove ball bearings, 51201 bearings dimensions: 12mm x 28mm x 11mm, Cr: 13200N, C0r: 19000N.
- Brand: FAG
- Inside Diameter: 12 mm
- Outside Diameter: 28 mm
- Width: 11 mm
- Basic dynamic load rating: 13.2 kN
- Basic static load rating: 13.2 kN
FAG 51205 thrust bearings | Dimensions: 25x47x15mm
Nodes bearings have FAG 51205 bearings in stock, Axial deep groove ball bearings, 51205 bearings dimensions: 25mm x 47mm x 15mm, Cr: 26500N, C0r: 50000N.
- Brand: FAG
- Inside Diameter: 25 mm
- Outside Diameter: 47 mm
- Width: 15 mm
- Basic dynamic load rating: 26.5 kN
- Basic static load rating: 26.5 kN
FAG 53306 thrust bearings | Dimensions: 30x60x22.6mm
Nodes bearings have FAG 53306 bearings in stock, Axial deep groove ball bearings, 53306 bearings dimensions: 30mm x 60mm x 22.6mm, Cr: 35500N, C0r: 65000N.
- Brand: FAG
- Inside Diameter: 30 mm
- Outside Diameter: 60 mm
- Width: 22.6 mm
- Basic dynamic load rating: 35.5 kN
- Basic static load rating: 35.5 kN
FAG 53307 thrust bearings | Dimensions: 35x68x25.6mm
Nodes bearings have FAG 53307 bearings in stock, Axial deep groove ball bearings, 53307 bearings dimensions: 35mm x 68mm x 25.6mm, Cr: N, C0r: N.
- Brand: FAG
- Inside Diameter: 35 mm
- Outside Diameter: 68 mm
- Width: 25.6 mm
- Basic dynamic load rating: 0 kN
- Basic static load rating: 0 kN
FAG 53308 thrust bearings | Dimensions: 40x78x28.5mm
Nodes bearings have FAG 53308 bearings in stock, Axial deep groove ball bearings, 53308 bearings dimensions: 40mm x 78mm x 28.5mm, Cr: 61000N, C0r: 112000N.
- Brand: FAG
- Inside Diameter: 40 mm
- Outside Diameter: 78 mm
- Width: 28.5 mm
- Basic dynamic load rating: 61 kN
- Basic static load rating: 61 kN
FAG 53309 thrust bearings | Dimensions: 45x85x30.1mm
Nodes bearings have FAG 53309 bearings in stock, Axial deep groove ball bearings, 53309 bearings dimensions: 45mm x 85mm x 30.1mm, Cr: 75000N, C0r: 140000N.
- Brand: FAG
- Inside Diameter: 45 mm
- Outside Diameter: 85 mm
- Width: 30.1 mm
- Basic dynamic load rating: 75 kN
- Basic static load rating: 75 kN
FAG 53310 thrust bearings | Dimensions: 50x95x34.3mm
Nodes bearings have FAG 53310 bearings in stock, Axial deep groove ball bearings, 53310 bearings dimensions: 50mm x 95mm x 34.3mm, Cr: 82000N, C0r: 169000N.
- Brand: FAG
- Inside Diameter: 50 mm
- Outside Diameter: 95 mm
- Width: 34.3 mm
- Basic dynamic load rating: 82 kN
- Basic static load rating: 82 kN
FAG 51206 thrust bearings | Dimensions: 30x52x16mm
Nodes bearings have FAG 51206 bearings in stock, Axial deep groove ball bearings, 51206 bearings dimensions: 30mm x 52mm x 16mm, Cr: 23900N, C0r: 46000N.
- Brand: FAG
- Inside Diameter: 30 mm
- Outside Diameter: 52 mm
- Width: 16 mm
- Basic dynamic load rating: 23.9 kN
- Basic static load rating: 23.9 kN
FAG 51207 thrust bearings | Dimensions: 35x62x18mm
Nodes bearings have FAG 51207 bearings in stock, Axial deep groove ball bearings, 51207 bearings dimensions: 35mm x 62mm x 18mm, Cr: 35500N, C0r: 67000N.
- Brand: FAG
- Inside Diameter: 35 mm
- Outside Diameter: 62 mm
- Width: 18 mm
- Basic dynamic load rating: 35.5 kN
- Basic static load rating: 35.5 kN
FAG 51208 thrust bearings | Dimensions: 40x68x19mm
Nodes bearings have FAG 51208 bearings in stock, Axial deep groove ball bearings, 51208 bearings dimensions: 40mm x 68mm x 19mm, Cr: 44000N, C0r: 97000N.
- Brand: FAG
- Inside Diameter: 40 mm
- Outside Diameter: 68 mm
- Width: 19 mm
- Basic dynamic load rating: 44 kN
- Basic static load rating: 44 kN
FAG 51209 thrust bearings | Dimensions: 45x73x20mm
Nodes bearings have FAG 51209 bearings in stock, Axial deep groove ball bearings, 51209 bearings dimensions: 45mm x 73mm x 20mm, Cr: 39000N, C0r: 80000N.
- Brand: FAG
- Inside Diameter: 45 mm
- Outside Diameter: 73 mm
- Width: 20 mm
- Basic dynamic load rating: 39 kN
- Basic static load rating: 39 kN
FAG 51210 thrust bearings | Dimensions: 50x78x22mm
Nodes bearings have FAG 51210 bearings in stock, Axial deep groove ball bearings, 51210 bearings dimensions: 50mm x 78mm x 22mm, Cr: 50000N, C0r: 106000N.
- Brand: FAG
- Inside Diameter: 50 mm
- Outside Diameter: 78 mm
- Width: 22 mm
- Basic dynamic load rating: 50 kN
- Basic static load rating: 50 kN
FAG 53311 thrust bearings | Dimensions: 55x105x39.3mm
Nodes bearings have FAG 53311 bearings in stock, Axial deep groove ball bearings, 53311 bearings dimensions: 55mm x 105mm x 39.3mm, Cr: 102000N, C0r: 207000N.
- Brand: FAG
- Inside Diameter: 55 mm
- Outside Diameter: 105 mm
- Width: 39.3 mm
- Basic dynamic load rating: 102 kN
- Basic static load rating: 102 kN
FAG 53312 thrust bearings | Dimensions: 60x110x38.3mm
Nodes bearings have FAG 53312 bearings in stock, Axial deep groove ball bearings, 53312 bearings dimensions: 60mm x 110mm x 38.3mm, Cr: 101000N, C0r: 207000N.
- Brand: FAG
- Inside Diameter: 60 mm
- Outside Diameter: 110 mm
- Width: 38.3 mm
- Basic dynamic load rating: 101 kN
- Basic static load rating: 101 kN
FAG 53313 thrust bearings | Dimensions: 65x115x39.4mm
Nodes bearings have FAG 53313 bearings in stock, Axial deep groove ball bearings, 53313 bearings dimensions: 65mm x 115mm x 39.4mm, Cr: 105000N, C0r: 220000N.
- Brand: FAG
- Inside Diameter: 65 mm
- Outside Diameter: 115 mm
- Width: 39.4 mm
- Basic dynamic load rating: 105 kN
- Basic static load rating: 105 kN